:) Couple of new mods installed *pixes*
#1
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
:) Couple of new mods installed *pixes*
So, I've been a little busy over the last month or so...besides with work and getting sick and working the logistics for Team Transport's trip to Vegas for Extreme Autofest this coming weekend.... here's a few things I've added to my baby:
Wheels / Suspension
* Staggered RP03 19x8.5 & 19x9.5
* Dunlop Direzza DZ101's (245/35/19 & 275/30/19) +42 (i'm pretty sure)
{notice the most excellent fender cut, instead of roll!!)
* Eibach Sportline springs (anybody want to buy my old ProKits for $100obo?)
{pixes are w/ ProKit Springs..Sportlines being installed tomorrow}
I've got a set of Eibach ProKit springs (#6363.140 fits sedan thru 04) let me know. for sale if anybody wants them. If are in the SoCal area, I can get you a deal in install too! ....$200 installed.
Wheels / Suspension
* Staggered RP03 19x8.5 & 19x9.5
* Dunlop Direzza DZ101's (245/35/19 & 275/30/19) +42 (i'm pretty sure)
{notice the most excellent fender cut, instead of roll!!)
* Eibach Sportline springs (anybody want to buy my old ProKits for $100obo?)
{pixes are w/ ProKit Springs..Sportlines being installed tomorrow}
I've got a set of Eibach ProKit springs (#6363.140 fits sedan thru 04) let me know. for sale if anybody wants them. If are in the SoCal area, I can get you a deal in install too! ....$200 installed.
Last edited by SoCalTed; 04-21-2005 at 09:01 AM. Reason: correcting install prince and prokit spring fitment
#2
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
#3
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
Electronics / Interior
Electronics
* Innovate Motorsports LM-1 Digital Wideband Air/Fuel Ratio Meter
* Innovate Motorsports LMA2 RPM Converter
* Valentine Research V1 w/ concealed display (custom dashmount later this week)
{pixes to come later!}
Interior
* Fully lined trunk w/ B-quiet Ultimate
* Trunk mat made from B-Quiet V-Comp
* Innovate Motorsports LM-1 Digital Wideband Air/Fuel Ratio Meter
* Innovate Motorsports LMA2 RPM Converter
* Valentine Research V1 w/ concealed display (custom dashmount later this week)
{pixes to come later!}
Interior
* Fully lined trunk w/ B-quiet Ultimate
* Trunk mat made from B-Quiet V-Comp
Last edited by SoCalTed; 04-18-2005 at 08:41 PM.
#4
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
#7
Trending Topics
#8
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
Originally Posted by SoCalTed
......
Interior
* Fully lined trunk w/ B-quiet Ultimate
* Trunk mat made from B-Quiet V-Comp
Interior
* Fully lined trunk w/ B-quiet Ultimate
* Trunk mat made from B-Quiet V-Comp
You've been busy.... lookin good
How did the V-comp work out?
I did the B-quiet Ultimat & have been thinking about adding the V-comp
Did you do anything more than the trunk?
I was considering the wheel wells & floors.
#10
Joined: Apr 2003
Posts: 3,165
Likes: 0
From: Kalifornia
MrBillMartin:
MSD Window switches allow you to program "windows" of RPMs that your nitrous will fire at. It is an additional safety, since the Zex does contain a WOT Throttle Position Switch, but that is not always 100% dead-on. The RPM limiter let's you get off the line (RPM wise) and ensures you are in the RPM zone (WOT) as well as cutting you off before you bounce off the rev-limiter.
And yes, the pix near of the wiper blade shows the little stem of the purge. All this is hidden under there:
Here's a link to what the purge looks/sounds like (from Zex) I don't have any vids myself, yet:
http://www.zex.com/Base/MultiMedia/P..._RapidFire.wmv
inTgr8tr:
The entire trunk (top, bottom, sides, wheel-well & back seat supports) are done in Ultimate.
Then I cut a trunk mat that covers about 90% of the trunk. I just layed my carpet over the top, traced it and cut it out. The left over pieces of the v-comp I put in between the braces of the carpet molding and the back seat.
deadmanincbh
The tires were dictated by Dunlop as a new sponsor.
I chose the sizes on the joint experiences from G35Lin (eddie) and GurgenPB (Gurgen), as well as input from TH723 (clint). Their input is crucial for pain free installs.
I went with 19's because I show, and 18's are not enough....but 20's were too much for me. The Enkei's are the same wheels that Gurgen has. They were a good choice for me, being lightweight and forged. Lip and bling-bling weren't a priority for me.
-ted
MSD Window switches allow you to program "windows" of RPMs that your nitrous will fire at. It is an additional safety, since the Zex does contain a WOT Throttle Position Switch, but that is not always 100% dead-on. The RPM limiter let's you get off the line (RPM wise) and ensures you are in the RPM zone (WOT) as well as cutting you off before you bounce off the rev-limiter.
And yes, the pix near of the wiper blade shows the little stem of the purge. All this is hidden under there:
Here's a link to what the purge looks/sounds like (from Zex) I don't have any vids myself, yet:
http://www.zex.com/Base/MultiMedia/P..._RapidFire.wmv
inTgr8tr:
The entire trunk (top, bottom, sides, wheel-well & back seat supports) are done in Ultimate.
Then I cut a trunk mat that covers about 90% of the trunk. I just layed my carpet over the top, traced it and cut it out. The left over pieces of the v-comp I put in between the braces of the carpet molding and the back seat.
deadmanincbh
The tires were dictated by Dunlop as a new sponsor.
I chose the sizes on the joint experiences from G35Lin (eddie) and GurgenPB (Gurgen), as well as input from TH723 (clint). Their input is crucial for pain free installs.
I went with 19's because I show, and 18's are not enough....but 20's were too much for me. The Enkei's are the same wheels that Gurgen has. They were a good choice for me, being lightweight and forged. Lip and bling-bling weren't a priority for me.
-ted
Last edited by SoCalTed; 04-19-2005 at 10:50 AM.
#11
Registered User
iTrader: (1)
Joined: Feb 2003
Posts: 2,458
Likes: 0
From: Los Angeles, National Socialist Democratic Republic of Facistfornia
Originally Posted by SoCalTed
GoGo
* Zex Wet Kit (stealth install!)
* Zex Rapid Fire Purge (blule LED)
* Zex Remote Opener
* Zex Blow Down Tube
* MSD Digital Window Switch
* 860 Performance Press Reg Bottle Heater
* DynoTune Digital Nitrous Pressure Gauge
More pixes and detail to follow....
* Zex Wet Kit (stealth install!)
* Zex Rapid Fire Purge (blule LED)
* Zex Remote Opener
* Zex Blow Down Tube
* MSD Digital Window Switch
* 860 Performance Press Reg Bottle Heater
* DynoTune Digital Nitrous Pressure Gauge
More pixes and detail to follow....
You mounted your stuff the same place as Mine, I'll check it out in Vegas
DR Charles just picked up my car So I'll get MY Prototype SKUNK 2 exhaust & Plenum spacer...........