***Help Please*** 350z suspension put on my 2005 Sedan has now created a Loud rattle
#17
Originally Posted by vrsc
My car looks great with the 350 suspension on it. RZ put it on yesterday but on my way home I started to notice a loud rattling from the rear passenger. I thought it might had been my OEM suspension in the trunk and kept going. I got home, took out the suspension and the ratling was still there?? I brought it back to them today and when the took a look at it, to their surprise one of the bolts from my rear shock tower had broken off?? After 1 hour they fixed it as good as new and it is still riding/looking great.
Just think though, I drove over 100 miles on only one rear shock bolt. Wow
Just think though, I drove over 100 miles on only one rear shock bolt. Wow
Glad nothing bad happened to you or your ride.
#18
#19
Originally Posted by Neal376
my mothers M45 developed this rattle after hitting a large pothole on the belt parkway.
my G35x developed this rattle after installing the 350Z Springs
I inspected both rear shock towers and the bolts looked fine.
when I go in for allignment, i will ask around.
my G35x developed this rattle after installing the 350Z Springs
I inspected both rear shock towers and the bolts looked fine.
when I go in for allignment, i will ask around.
#21
Originally Posted by vrsc
My car looks great with the 350 suspension on it. RZ put it on yesterday....
#22
Originally Posted by FL-G35
When you said you took it back to RZ, if you meant RZ motoring in Tampa, I can see why you had the problem right there. They tried to install wheels on my brothers AMG and said they couldn't because of the wrong bolts. He ended up taking it to Wheel Tech and they hooked it up right. RZ was totaly wrong.
No, the Orlando shop!!
I have not had any problems/noises since they replaced the bolt!!
#23
and that's why i did the suspension swap myself.......after reading the diy instructions 3-5 times....i said to myself i can do this.........torqued everyting down and 20,000 miles later, no problems.....nothing wrong with taking it to a shop, just wanted to eliminate the x factor.........
lucky it held up with one bolt and alls well now.
lucky it held up with one bolt and alls well now.
#24
to you know what to torque everything down too?(wheres the DIY?)
thanks
naaaaaaah, I believe the issue is isolated to my vehicle. Rudy has done work to so many cars including his own! I did not notice the sound untill I put the 19's on. I torqued down my wheels too 100 ft/lbs. I am really not sure what it is, but I will bring it to Rudy's and check again. Maybe I am imagining it. Its not loud like how vrsc describes it...you really have to listen to it.
thanks
naaaaaaah, I believe the issue is isolated to my vehicle. Rudy has done work to so many cars including his own! I did not notice the sound untill I put the 19's on. I torqued down my wheels too 100 ft/lbs. I am really not sure what it is, but I will bring it to Rudy's and check again. Maybe I am imagining it. Its not loud like how vrsc describes it...you really have to listen to it.
#25
Originally Posted by Neal376
to you know what to torque everything down too?(wheres the DIY?)
thanks
naaaaaaah, I believe the issue is isolated to my vehicle. Rudy has done work to so many cars including his own! I did not notice the sound untill I put the 19's on. I torqued down my wheels too 100 ft/lbs. I am really not sure what it is, but I will bring it to Rudy's and check again. Maybe I am imagining it. Its not loud like how vrsc describes it...you really have to listen to it.
thanks
naaaaaaah, I believe the issue is isolated to my vehicle. Rudy has done work to so many cars including his own! I did not notice the sound untill I put the 19's on. I torqued down my wheels too 100 ft/lbs. I am really not sure what it is, but I will bring it to Rudy's and check again. Maybe I am imagining it. Its not loud like how vrsc describes it...you really have to listen to it.
#26
#27
Originally Posted by FL-G35
When you said you took it back to RZ, if you meant RZ motoring in Tampa, I can see why you had the problem right there. They tried to install wheels on my brothers AMG and said they couldn't because of the wrong bolts. He ended up taking it to Wheel Tech and they hooked it up right. RZ was totaly wrong.
RZ Tampa hooked my G to Z spring setup without a problem. Fast, furious and affordable. I chatted with another customer in the waiting room that was getting a turbo and engine management on his acura and he had nothing but good things to say. I would definitely go there again.
#28
Originally Posted by Neal376
cool. i might stop buy and say hi.
i will call axis wheels tom and ask what they recommend.
I might just stop by and say hi tom. maybe we can find a good place for allignment too!
i will call axis wheels tom and ask what they recommend.
I might just stop by and say hi tom. maybe we can find a good place for allignment too!
Thread
Thread Starter
Forum
Replies
Last Post
kinetek
Brakes & Suspension
9
08-03-2015 04:25 PM
tehmoonrulz
Brakes & Suspension
1
07-19-2015 10:44 PM