Rear bumper
Joined: Mar 2005
Posts: 426
Likes: 1
From: Yonkers, NY
Rear bumper
I noticed that the seam between the driver side rear bumper and quarter panel is not flush. I have looked at one (1) other G and noticed the same thing. I have not been hit nor do I park where someone else parks behind me. Anyone else with the same problem?
Last edited by rupdog326; Sep 30, 2007 at 03:26 PM.
Registered User
Joined: Jun 2003
Posts: 1,288
Likes: 10
From: Boca Raton Fl
It's just the luck of the draw if you get one that is flush. Many of these cars come from the factory with different clearances on the bumpers as well as as trunk lids and other body parts. Mass production is not a perfect science.
Registered User
Joined: May 2007
Posts: 143
Likes: 0
From: Mississippi
i noticed that the other day when washing the car also. Thought it was just mine but you guys think Infiniti would do anything about it? Im guessing not.
Has anyone else noticed that behind the back tires in the lower part, it just seems really weak and flimsy? You can easily push it in with your hand and seems like it could easily get damaged.
Has anyone else noticed that behind the back tires in the lower part, it just seems really weak and flimsy? You can easily push it in with your hand and seems like it could easily get damaged.
Trending Topics
^^ I can attest to that - it's held on by a mat piece (feels like hard felt/fibre), and it tears pretty easily.
Oh, and I don't have that panel fit issue.
Oh, and I don't have that panel fit issue.
Last edited by G35Now!; Sep 30, 2007 at 10:09 PM.
Registered User
Joined: Jan 2007
Posts: 1,328
Likes: 0
From: Pasadena California USA
Fit-N-Finish damn tight on mine... maybe your tint has contracted and pulled the body panels in.
J/K
Any other mods that might have affected this panel? Ever backed up over a dead cow?
Seriously, that doesn't look right. I'd mention it to the dealer and see if they can pull it in a bit.
J/K
Any other mods that might have affected this panel? Ever backed up over a dead cow?
Seriously, that doesn't look right. I'd mention it to the dealer and see if they can pull it in a bit.
Joined: Mar 2005
Posts: 426
Likes: 1
From: Yonkers, NY
Originally Posted by G-Whizzer
Fit-N-Finish damn tight on mine... maybe your tint has contracted and pulled the body panels in.
J/K
Any other mods that might have affected this panel? Ever backed up over a dead cow?
Seriously, that doesn't look right. I'd mention it to the dealer and see if they can pull it in a bit.
J/K
Any other mods that might have affected this panel? Ever backed up over a dead cow?
Seriously, that doesn't look right. I'd mention it to the dealer and see if they can pull it in a bit.
Originally Posted by rupdog326
I guess you were one of the lucky ones. Anyway, it seems that this is not an isolated thing due to the feedback up to this point. Will definitely notify dealer.
My fit is okay but I agree about the lower part of the bumper by the wheels. I noticed how flimsy that area is when washing my car. It does not take much pressure for it to flex.
Thread
Thread Starter
Forum
Replies
Last Post
st33zygill
Exterior - Body Parts
3
Jul 29, 2015 10:05 PM
