I know made in China.Cheap!! i was planing to put on my Door Step!!

Just Email and ask this guy that you need T10 License plate XENON light for G35

http://cgi.ebay.com/ebaymotors/JDM-B...spagenameZWDVW

 

hey eartho - any instruction threads on replacing license plate lights out there that u know about?

or maybe u can just tell us? :P

 

Yeh,Very easy!!!!!! total is 2 Bulbs

1) Look under your License Plate Light.There is a hink on the right end of each light.
2) Push it all the way to the Left end and push down!!
3) Pop out the Light Cover by Pushing the Pins
4) Replace it with New Bulbs.

Hope this help!! Will try to DIY Picture tomorrow.

 

[QUOTE=Wes_888]hey eartho - any instruction threads on replacing license plate lights out there that u know about?

 

Yeh,Very easy!!!!!! total is 2 Bulbs

1) Look under your License Plate Light.There is a hink on the right end of each light.
2) Push it all the way to the Left end and push down!!
3) Pop out the Light Cover by Pushing the Pins
4) Replace it with New Bulbs.

Hope this help!! Will try to DIY Picture tomorrow.

 

awesome! thanks! im gonna order some of these lights then! :P

 

Im assuming changing the parking lights is not this simple..

you have instructions for that too? hehe

 

You mean Reverse?

 

reverse? im lost.

 

What i meant is R (reverse)
Sorry if i did not currect you.
Parking Citly light? Corner locate on top of HEADLIGHT?

 

Actually I meant the daytime running lights

 

Ok, what does Impul ECU do? How much power should I expect from that load of money ?

 

For Parking CityLight.

1) For Left Side..Turn the Wheel to the Right
2) For Right Side..Turn the Wheel to the Left

You need to follow this instruction.For just changing Parking Citylight you DO NOT have to take off the wheel
Just loose the 3 lock pins and open up.

https://g35driver.com/forums/v36-diy/204234-diy-philips-6000k-ultinon-install.html

Next is to locate the bulb that plug into the back of Parking light and loosen it
by turning to the left and pull it out.

Repeat the same.
GL

 

awesome! thanks man :P

 

hey earth, would i follow your instructions for just cutting the wheel left or right in order to change the turn signal bulbs too? thanks man. you're the lightmaster