Gauging Interest: AUTOKITS X '07+ (V36) Sedan Rear Valence "Teaser pics"
#1
Gauging Interest: AUTOKITS X '07+ (V36) Sedan Rear Valence "Teaser pics"
This is the rear diffuser I was writting to you guys about. I copied the thread that they started over there.
http://myg37.com/forums/body-interio...aser-pics.html
Here are some "Teaser pics" for the 2007+ Rear Valence/Diffuser for Sedans.
This is not the final product, we still need to do some work but ask you can see.. fitment is 100% good .
Let me know what you think guys!!
also "SORRY ABOUT THE BAD QUALITY PICTURES, WE ARE GONNA TAKE SOME MORE AND SHOW EVERY SINGLE DETAIL"
Just to clarify some things, the top .75" -1" is going to be cut off, it is only there in order to make a mold.
The middle part of he diffuser sits about 2 inches lower than stock, although it is still well above the tips (4.5") as you can see in the pics.
If you have any questions please post them and I will do my best to answer them.
Remember guys this is still a prototype. There is still time to make changes before the final mold is done.
http://myg37.com/forums/body-interio...aser-pics.html
Here are some "Teaser pics" for the 2007+ Rear Valence/Diffuser for Sedans.
This is not the final product, we still need to do some work but ask you can see.. fitment is 100% good .
Let me know what you think guys!!
also "SORRY ABOUT THE BAD QUALITY PICTURES, WE ARE GONNA TAKE SOME MORE AND SHOW EVERY SINGLE DETAIL"
Just to clarify some things, the top .75" -1" is going to be cut off, it is only there in order to make a mold.
The middle part of he diffuser sits about 2 inches lower than stock, although it is still well above the tips (4.5") as you can see in the pics.
If you have any questions please post them and I will do my best to answer them.
Remember guys this is still a prototype. There is still time to make changes before the final mold is done.
Last edited by BocaIvan; 12-03-2009 at 07:33 PM.
#4
#7
Trending Topics
#9
Registered User
iTrader: (1)
Join Date: Dec 2007
Location: Fort Lauderdale,FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
This is what BocaIvan answered on myg37.com
3M and clips on the bottom are supporting it.
Just to clarify some things, the top .75" -1" is going to be cut off, it is only there in order to make a mold.
Remember about 1" will be trimmed off of the top all across, it's needed there for now to make the mold.
Autokits X already made a rear valence for coupes and they said, the price is gonna be the same.
They have the AUTOKITS X "Ryou Style Grille"
2009 SEMA SHOW
and also they are working on FRONT LIP
3M and clips on the bottom are supporting it.
Remember about 1" will be trimmed off of the top all across, it's needed there for now to make the mold.
Autokits X already made a rear valence for coupes and they said, the price is gonna be the same.
They have the AUTOKITS X "Ryou Style Grille"
2009 SEMA SHOW
and also they are working on FRONT LIP
Last edited by G35FL305; 12-04-2009 at 12:15 AM.
#10
#12
Thanks G35FL305 for answering those questions!
No it is not, it's totally different.
They will be working on the final design next week and hoefully have a mold done.
I am assuming you mean for the sedan. If so, I believe it will but I am not sure as it has not been prototyped yet.
Yes this is my car The exhaust is a Greddy SE and it has 4.5" tips. The FI exhaust should fit just fine.
Pricing will be the same as the same as the coupe.
Thanks! Yes it will look much better! The top .75"-1" will be trimmed off and it will flow with the line of the rear bumper.
The top .75"-1" will be trimmed off and it will flow with the line of the rear bumper
It attaches with double sided tape and 2 screws on the bottom. They may put 2 more but I do not think it is needed.
It attaches with double sided tape and 2 screws on the bottom. They may put 2 more but I do not think it is needed.
No more man, no more! HAHAHA
I am assuming you mean for the sedan. If so, I believe it will but I am not sure as it has not been prototyped yet.
Pricing will be the same as the same as the coupe.
It attaches with double sided tape and 2 screws on the bottom. They may put 2 more but I do not think it is needed.
It attaches with double sided tape and 2 screws on the bottom. They may put 2 more but I do not think it is needed.
No more man, no more! HAHAHA
#14
They will have a full CF piece available as well.
Last edited by BocaIvan; 12-04-2009 at 08:41 AM.
#15