This is a question for all the fitment gurus, F14 guys and v36 guys ...

I'm about to buy wheels soon and i don't know what is the most aggressive specs we can run without pulling fenders. What i want is to have a really really concave wheel. Forgestar reps don't seem to be helping me out, so i guess this community will .

http://www.forgestar.com/v2/wheelsf14.php

What's the most concave setup i can pull without pulling fenders?
I don't care about running stretched tires.

 

subcribed

 

haha me too...i might have to grab a set...sorry i cant help on the fitment but i would like to know too

holmes

 

I'm not the most aggressive, but I think my setup might give you a good place to start. I'm currently running 20x9 +25 225/35/20 front 20x10.5 +30 235/35/20 rear. Ride height is set at 25 1/4 all around. Front camber is set around -2.5 and rear is at -4.2. No fender work done at all. I can probably go a little more aggressive with spacers by adding 10-15mm to the fronts and at most 5mm to the rears.

 

I would say that I've seen a guy run 19x9.5 and 19x10.5 +22 offset all around without pulling their fenders and they were ok, it had a little bit of poke on the rear but he was slammed and had stretched tires and his was a RWD model like yours. Not sure on the best offsets though

 

Thanks! I'm trying to find something for my car. I'm going to be running 19's and stretched of course.

How low are you?
Can I get pics?


The funny thing is I did run that same spec setup you mentioned. The front was 19x9.5 +12 and that was flush, the rear on the other hand was different. It poked out the length of half an iPhone. I actually made a thread about the test fitting.




Damn you subbers! I needed some help haha

 

Here's the most recent:



Here's a pic to show my rear camber:

 

That looks good! ^^

Don't think I'll be running that much camber though. I take this baby to the mountains and I'll be running -1.5 or -1.6 max.

What do you think about 19x9.5(f) +25 and 19x10(r)+30?

 

Yeah I saw the major poke lol I think the other guy was more slammed than you though and his car was running more camber but I could be wrong.

 

How low do you plan on being? When I had my eibach prokits, I was already at -2 of camber. Its gonna be hard to run an aggressive setup with hose camber settings. You'll either have to poke a lot or not be as slammed.

 

I'm already pretty damn low...Hmm so what would you suggest me to run at 19's given my current settings?

 

I'm not confident enough with giving you what specs to go with. I'm still learning as well, but with the specs you posted, the rears would be 6mm less aggressive than my setup. You would still be flush with the fender and possibly poke a little. I just don't know how much camber you would need.

 

who is getting your wheels now?

 

What wheels are you currently running? Can you post pics of ur car?

 

Oem 18 sports