G35 Sedan V36 2007- 08 Discussion about the 2nd Generation G35 Sedan 2007 - 08

Any safe way to remove the small pits & scratches on headlight covers?

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jul 13, 2012 | 07:17 PM
  #1  
blnewt's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2007
Posts: 1,699
Likes: 137
From: New Mexico
Any safe way to remove the small pits & scratches on headlight covers?

Just painted my headlights and would love to have perfect or at least close to perfect covers again. Anyone know if there's a product or procedure that will at least improve the dings and light scratches on the covers.
 
Reply
Old Jul 13, 2012 | 08:07 PM
  #2  
G3065's Avatar
Registered User
iTrader: (1)
Joined: Apr 2011
Posts: 477
Likes: 21
From: Dallas, TX
I personally don't think there is such procedure... I've tried practically all the headlight products that are "scratch removers'' but none that have actually worked. Have you checked on youtube yet?
 
Reply
Old Jul 13, 2012 | 09:19 PM
  #3  
blnewt's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2007
Posts: 1,699
Likes: 137
From: New Mexico
Originally Posted by G3065
I personally don't think there is such procedure... I've tried practically all the headlight products that are "scratch removers'' but none that have actually worked. Have you checked on youtube yet?
Haven't checked youtube, I'll give it a shot. What products have you tried?
 
Reply
Old Jul 14, 2012 | 12:53 PM
  #4  
TaBzRx's Avatar
Registered User
Joined: Apr 2007
Posts: 239
Likes: 7
From: OKC
I have heard white toothpaste does wonders. Put 4 or 5 dabs of it on the headlights and rub it in circular motion. I haven't personally tried it but couldn't hurt. If it smudges, just water it off.
 
Reply
Old Jul 14, 2012 | 02:22 PM
  #5  
misfit77's Avatar
Registered User
Joined: Jun 2009
Posts: 103
Likes: 2
Originally Posted by TaBzRx
I have heard white toothpaste does wonders. Put 4 or 5 dabs of it on the headlights and rub it in circular motion. I haven't personally tried it but couldn't hurt. If it smudges, just water it off.

Toothpaste? its like rubbing pumice on your headlights.

Be prepared to follow up with a polish.

On my other car, I had to use sandpaper, 100 grit, 500 grit 1000grit....then plastic polish, but I think Wenol or Mag polish did a better job than the plastic polish.
 
Reply
Old Jul 14, 2012 | 04:32 PM
  #6  
G3065's Avatar
Registered User
iTrader: (1)
Joined: Apr 2011
Posts: 477
Likes: 21
From: Dallas, TX
Originally Posted by blnewt
Haven't checked youtube, I'll give it a shot. What products have you tried?
I tried mcguiars plastX, rainx, and now the turtle wax (red bottle).
They're all about the same except the rainX brand you will need to use water to rub off.
I've even tried the different level grits (sanding it down) and I personally would take it to a pro at that point because I almost scratched it up permanently
 
Reply
Old Jul 14, 2012 | 04:35 PM
  #7  
joedaddy1's Avatar
Registered User
iTrader: (3)
Joined: Jul 2006
Posts: 1,608
Likes: 45
try a 3M headlight kit.. the one that uses a drill.. it worked for me when PlastiX wouldn't..
 
Reply
Old Jul 14, 2012 | 09:05 PM
  #8  
blnewt's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2007
Posts: 1,699
Likes: 137
From: New Mexico
Thanks for the comments & suggestions, it looks like this may be the best plan of attack from a thread I have over on myg37
Originally Posted by Mudgen
Sure. There are a number of products out there for refinishing headlight cover/lenses that start with a sanding step if your damage is fairly severe. But I've had good results on moderate renovations with a Porter Cable random orbit (7424XP) and Meguiars M105 followed by M205.
 
Reply
Old Jul 15, 2012 | 02:21 AM
  #9  
Ditchdrinker's Avatar
Registered User
Joined: Feb 2009
Posts: 80
Likes: 0
While I haven't tried in on my G, I have used the Sylvania Headlight Restoration Kit on my last car and it worked very well.
 
Reply
Old Jul 15, 2012 | 01:01 PM
  #10  
vqsmile's Avatar
Registered User
iTrader: (1)
Joined: Oct 2010
Posts: 3,945
Likes: 427
From: SF bayarea (925)
Keep in mind that any polishing, to the level that would remove deeper scratches and pits, will also remove all of the UV protection from the front of the lens. Therefore, you will inherit the ongoing task of maintaining your lenses from yellowing prematurely.
 
Reply
Old Jul 15, 2012 | 01:19 PM
  #11  
blnewt's Avatar
Thread Starter
|
Registered User
iTrader: (3)
Joined: Aug 2007
Posts: 1,699
Likes: 137
From: New Mexico
Originally Posted by vqsmile
Keep in mind that any polishing, to the level that would remove deeper scratches and pits, will also remove all of the UV protection from the front of the lens. Therefore, you will inherit the ongoing task of maintaining your lenses from yellowing prematurely.
Good point VQ, my covers aren't too badly pitted, just something that kinda bugs me since crystal clear would really make the lights pop. I think I may heed your warning and just live with it
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
derres
G35 Cars
3
Aug 28, 2015 03:27 PM
friedsqrl
18 Inch
11
Aug 9, 2015 12:41 PM
JG_G35
Exterior - Body Parts
5
Aug 2, 2015 07:02 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:18 AM.