My service light came on a while back and I got the code from the OBD code reader.

From checking on the net, it looks like a leak on the air pressure gas tank. Am I lookiing in the right area?

Guy

 

You are looking in the right direction. The most common cause is a loose gas cap. Before you get carried away, have you checked that?

http://www.autocodes.com/p0455_infiniti.html

 

Yes I did and the gas cap is securly on.

Does anyone know where the EVAP canister purge volume control solenoid valve is on a G35 , 2008.

Thank you

Guy

 

See the Factory Service Manual, Engine Control section (EC), pages EC-23 and EC-28.

Basically, it's in the engine compartment, between the back of the intake manifold and the firewall, just to the right side of center. The "S" bend hose is on the left, and the solenoid is on the right. (From the driver's perspective)

EDIT> Here's a link to the FSM: http://www.nicoclub.com/FSM/G35/Sedan/2008/

 

I will look and get back to you - Thanks - Guy

 

Guy,
Did it work my 08 keeps throwing same code. I tried tightening the cap then a replacement cap with no luck.

 

Link doesn't work. Tell me they are not a valid pdf?? Rob

 

I just tried it again and it works fine for me. :

 

So I replaced the charcoal canister and the purge valve but the ses has come back up and I'm going to get it scanned to see what code comes back up and I'll let you guys know. It was the purge valve but I didn't realize this was for 07+ G35's. ㄴㅇㄴ