Digital Deviant Progress Thread
#211
#213
So my 06 projectors were really cloudy and beyond repair as the damage was inside especially with the stress cracks. So, anyone looking for replacement lenses and can find these cheap like i did. Do it, then just clear coat them.
Before
So, I bought a set of these ebay lights for 200 bucks new.
Then took them apart
Removed the bezel
Installed the 06 bezel and done
Before
So, I bought a set of these ebay lights for 200 bucks new.
Then took them apart
Removed the bezel
Installed the 06 bezel and done
Last edited by DigitalDeviant; 08-16-2015 at 08:38 PM.
#218
#220
#221
The following users liked this post:
Frankieg35 (08-19-2015)
#222
I've been busy. So this is the teardown of the new motor before being sent off to the machine shop, getting the bay painted and some carbon work that I am doing. Just waiting for the polished parts to show up from Baid and then i can start getting the motor put together, since it only took them 5 days to do the machine work.
Last edited by DigitalDeviant; 10-23-2015 at 09:09 AM.
#224
Engine:
Painted Bay
Painted Core support
Rebuilt Revup Engine:
Weisco Pistons 8.5:1
Eagle Connecting Rods
ARP L19 Head & Main Studs
Block inspected and cleaned
Block redecked
Block modified for better cooling with HR Headgaskets
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
Cometic HR Head Gaskets
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
JWT S7 Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
Viton Valve Stem Seals
Ferrea Valve Train Kit
Valve Stem Heights set
Cold Clearance set for cams
Heads assembled
Cosworth High Performance Oil Pump
Mishimoto Low Temp Thermostat
Passenger and Drivers Side Wire Tuck
gredyy TT kit 18g - Turbo's rebuilt
APS intercooler
SxExCx Bolt / Nut kit - Red, Black and Chrome
Baid Polished Plenum
Baid Polished Throttle Body
Baid Polished Cam Covers
Baid Polished VTCS
Baid Polished coolant pipes
Baid Polished front timing cover
Baid Polished rear timing cover
Baid Polished 5/16 spacer
Baid Polished mrev2
Baid polished lower collector
Baid Polished Oil return
Baid Polished Coil pack covers
Z1 Stainless Steel Clutch Line
JDM Battery/Brake cover
RareJDM Polished Aluminium JDM Engine Wire Cover
Z1 Idler Pulley Elimination Kit + New belts
Import Parts Pro PCV valve AN Fitting (-8AN)
Z1 Master Hose Set (Black)
Mishimoto Radiator
Mishimoto Fan shroud
CDP Poly Motor Mounts
Z1 Poly Trans mounts
Z1 Poly motor mounts
Mishimoto Oil Sandwich Plate with 3 1/8 NPT threads
Pianted Valve Covers
Painted Bay
Painted Core support
Rebuilt Revup Engine:
Weisco Pistons 8.5:1
Eagle Connecting Rods
ARP L19 Head & Main Studs
Block inspected and cleaned
Block redecked
Block modified for better cooling with HR Headgaskets
Block Bored and Honed using a Torque Plate
Rotating assembly balanced
Crank magnafluxed and the journals micro-polished
New Moly coated Race Spec main bearings installed
New Moly coated Race Spec rod bearings installed
Block assembled
Cometic HR Head Gaskets
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
JWT S7 Cams
JWT Heavy Duty Valve Springs
5 angle radius cut valve job
Viton Valve Stem Seals
Ferrea Valve Train Kit
Valve Stem Heights set
Cold Clearance set for cams
Heads assembled
Cosworth High Performance Oil Pump
Mishimoto Low Temp Thermostat
Passenger and Drivers Side Wire Tuck
gredyy TT kit 18g - Turbo's rebuilt
APS intercooler
SxExCx Bolt / Nut kit - Red, Black and Chrome
Baid Polished Plenum
Baid Polished Throttle Body
Baid Polished Cam Covers
Baid Polished VTCS
Baid Polished coolant pipes
Baid Polished front timing cover
Baid Polished rear timing cover
Baid Polished 5/16 spacer
Baid Polished mrev2
Baid polished lower collector
Baid Polished Oil return
Baid Polished Coil pack covers
Z1 Stainless Steel Clutch Line
JDM Battery/Brake cover
RareJDM Polished Aluminium JDM Engine Wire Cover
Z1 Idler Pulley Elimination Kit + New belts
Import Parts Pro PCV valve AN Fitting (-8AN)
Z1 Master Hose Set (Black)
Mishimoto Radiator
Mishimoto Fan shroud
CDP Poly Motor Mounts
Z1 Poly Trans mounts
Z1 Poly motor mounts
Mishimoto Oil Sandwich Plate with 3 1/8 NPT threads
Pianted Valve Covers
#225
WOW, you're not playing around. One day I'll be in your shoes (especially if I get this new job) lol. I guess you're aiming for 600whp or more with a list like that, you can't go wrong. I remember, years ago. Probably 10 or more years earlier, their was a guy (I think he was a pilot), he had a G coupe with the same kind of work you're doing. If memory serves me correctly (and it does) it was making 700 plus horse at the wheels. The only thing that made it stand out was his wheel and tire setup. He had 20's but, everything was done right. Nothing flashy but, if you tried him. You were in for a huge surprise.
Last edited by Mr. Brooks; 09-11-2015 at 11:59 PM.