General Tech Questions This Forum is Only for Questions and Posts that Do Not fit under the other Tech categories.(No Classified Posts)

Throwing Codes P0138 & P0037

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 15, 2013 | 07:49 PM
  #1  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
Throwing Codes P0138 & P0037

I was throwing these codes and replaced both rear 02 sensors, after resetting the ecu with scanner the car is still throwing these codes. After codes throw the car will go into limp mode and will not allow you to go over 2500rpm in any gear...

My car is a 03 Sedan has Injen Cai,
Long tubes, no cats, y-pipe and catback.


any ideas?
 
Reply
Old Jan 15, 2013 | 10:49 PM
  #2  
seymore4's Avatar
Premier Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (114)
Joined: Mar 2009
Posts: 4,972
Likes: 433
From: West coast
m56
Premier Member

You need to get tuned or get rid of the LTH's. You can't tune most of the 03's with Uprev so I would check your ecu first, if you're in luck its the newer model and you can tune it with Uprev, but most likely you're SOL.
 
Reply
Old Jan 16, 2013 | 11:49 AM
  #3  
Sparda1123's Avatar
Registered User
Joined: Dec 2010
Posts: 1,426
Likes: 27
From: Orlando,FL
^+1 I had a client who has an 03 he was throwing the same codes and i was able to correct the issue with osiris for him. Like seymore4 said check your ecu if your in luck and have someone with osiris tuner in your area they can pull your ECU part # and we can see if its compatiable for you or you can contact uprev directly.
 
Reply
Old Jan 16, 2013 | 01:28 PM
  #4  
seymore4's Avatar
Premier Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (114)
Joined: Mar 2009
Posts: 4,972
Likes: 433
From: West coast
m56
Premier Member

Check which ECU you have and post back up

 

Last edited by seymore4; Jan 16, 2013 at 01:33 PM.
Reply
Old Jan 21, 2013 | 09:53 PM
  #5  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
Originally Posted by seymore4
You need to get tuned or get rid of the LTH's. You can't tune most of the 03's with Uprev so I would check your ecu first, if you're in luck its the newer model and you can tune it with Uprev, but most likely you're SOL.
Yup I have known for a while I am SOL bc I don't have the good Ecu
 
Reply
Old Jan 21, 2013 | 09:56 PM
  #6  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
Originally Posted by seymore4
Check which ECU you have and post back up

Thanks for the pics, I m going now to double check which 1 I had...when I called Uprev, they just asked me, metal or black plastic box...I know it's metal, but now I m hoping I have the bottom one...
 
Reply
Old Jan 21, 2013 | 10:16 PM
  #7  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
The 3 ecus above dont match my ecu. The ECU in my car is a silver metal box, but only has 2 small plugs in the center of the box. This is located on the passenger (right) side lower kick panel. If I post the numbers off the ecu, would that help determine if mine will work?
 
Reply
Old Jan 21, 2013 | 10:27 PM
  #8  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
A64-000 ln4 2x08
 
Reply
Old Jan 21, 2013 | 10:31 PM
  #9  
seymore4's Avatar
Premier Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (114)
Joined: Mar 2009
Posts: 4,972
Likes: 433
From: West coast
m56
Premier Member

I'd call uprev tomorrow and ask Jared or Omar, I really don't know. If you have your VIN handy I believe they can reference that as well
 
Reply
Old Jan 21, 2013 | 10:50 PM
  #10  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
I grab the vin# as well...& call them 2mrw...Very tired of throwing codes, the Car is running like crap!!! If the Ecu isn't flashable, I may go with a Apexi Neo piggyback & tune it. I just moved up to Atlanta, from Pensacola. So hopefully there are some guys up here that can tune...
 
Reply
Old Jan 22, 2013 | 01:37 AM
  #11  
seymore4's Avatar
Premier Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (114)
Joined: Mar 2009
Posts: 4,972
Likes: 433
From: West coast
m56
Premier Member

you'll have better luck removing the LTH's and putting stock cats back on over tuning with the Apexi Neo
 
Reply
Old Jan 22, 2013 | 10:50 AM
  #12  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
what about a set of shorty headers and hi flow cats, then tune with Apexi Neo?
 
Reply
Old Jan 22, 2013 | 08:52 PM
  #13  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
Looking at a set of Strup Headers and Kinetix High Flow cats..
 
Reply
Old Jan 23, 2013 | 03:26 PM
  #14  
03GT35R's Avatar
Thread Starter
|
Registered User
iTrader: (1)
Joined: Aug 2006
Posts: 299
Likes: 4
I may be in luck, called uprev and they are telling me to bring the car to Forged Performance in Atlanta to do an ECU dump so they can look at the data and see if it can be tuned..Crossing Fingers!!!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
atomevolution
Engine - Exhaust
1
Oct 12, 2015 01:00 PM
Learned Hand
G35 Sedan V35 2003-06
1
Oct 1, 2015 09:02 AM
Detailed Image
Care & Detailing
0
Sep 28, 2015 07:04 AM
vamarris
Engine, Drivetrain & Forced-Induction
0
Sep 26, 2015 12:56 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 03:25 AM.