General Tech Questions This Forum is Only for Questions and Posts that Do Not fit under the other Tech categories.(No Classified Posts)

Throwing Codes P0138 & P0037

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 01-15-2013, 07:49 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
Throwing Codes P0138 & P0037

I was throwing these codes and replaced both rear 02 sensors, after resetting the ecu with scanner the car is still throwing these codes. After codes throw the car will go into limp mode and will not allow you to go over 2500rpm in any gear...

My car is a 03 Sedan has Injen Cai,
Long tubes, no cats, y-pipe and catback.


any ideas?
 
  #2  
Old 01-15-2013, 10:49 PM
seymore4's Avatar
Premier Member

iTrader: (114)
Join Date: Mar 2009
Location: West coast
Posts: 4,906
Received 418 Likes on 336 Posts
You need to get tuned or get rid of the LTH's. You can't tune most of the 03's with Uprev so I would check your ecu first, if you're in luck its the newer model and you can tune it with Uprev, but most likely you're SOL.
 
  #3  
Old 01-16-2013, 11:49 AM
Sparda1123's Avatar
Registered User
Join Date: Dec 2010
Location: Orlando,FL
Posts: 1,426
Received 26 Likes on 23 Posts
^+1 I had a client who has an 03 he was throwing the same codes and i was able to correct the issue with osiris for him. Like seymore4 said check your ecu if your in luck and have someone with osiris tuner in your area they can pull your ECU part # and we can see if its compatiable for you or you can contact uprev directly.
 
  #4  
Old 01-16-2013, 01:28 PM
seymore4's Avatar
Premier Member

iTrader: (114)
Join Date: Mar 2009
Location: West coast
Posts: 4,906
Received 418 Likes on 336 Posts
Check which ECU you have and post back up

 

Last edited by seymore4; 01-16-2013 at 01:33 PM.
  #5  
Old 01-21-2013, 09:53 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
Originally Posted by seymore4
You need to get tuned or get rid of the LTH's. You can't tune most of the 03's with Uprev so I would check your ecu first, if you're in luck its the newer model and you can tune it with Uprev, but most likely you're SOL.
Yup I have known for a while I am SOL bc I don't have the good Ecu
 
  #6  
Old 01-21-2013, 09:56 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
Originally Posted by seymore4
Check which ECU you have and post back up

Thanks for the pics, I m going now to double check which 1 I had...when I called Uprev, they just asked me, metal or black plastic box...I know it's metal, but now I m hoping I have the bottom one...
 
  #7  
Old 01-21-2013, 10:16 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
The 3 ecus above dont match my ecu. The ECU in my car is a silver metal box, but only has 2 small plugs in the center of the box. This is located on the passenger (right) side lower kick panel. If I post the numbers off the ecu, would that help determine if mine will work?
 
  #8  
Old 01-21-2013, 10:27 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
A64-000 ln4 2x08
 
  #9  
Old 01-21-2013, 10:31 PM
seymore4's Avatar
Premier Member

iTrader: (114)
Join Date: Mar 2009
Location: West coast
Posts: 4,906
Received 418 Likes on 336 Posts
I'd call uprev tomorrow and ask Jared or Omar, I really don't know. If you have your VIN handy I believe they can reference that as well
 
  #10  
Old 01-21-2013, 10:50 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
I grab the vin# as well...& call them 2mrw...Very tired of throwing codes, the Car is running like crap!!! If the Ecu isn't flashable, I may go with a Apexi Neo piggyback & tune it. I just moved up to Atlanta, from Pensacola. So hopefully there are some guys up here that can tune...
 
  #11  
Old 01-22-2013, 01:37 AM
seymore4's Avatar
Premier Member

iTrader: (114)
Join Date: Mar 2009
Location: West coast
Posts: 4,906
Received 418 Likes on 336 Posts
you'll have better luck removing the LTH's and putting stock cats back on over tuning with the Apexi Neo
 
  #12  
Old 01-22-2013, 10:50 AM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
what about a set of shorty headers and hi flow cats, then tune with Apexi Neo?
 
  #13  
Old 01-22-2013, 08:52 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
Looking at a set of Strup Headers and Kinetix High Flow cats..
 
  #14  
Old 01-23-2013, 03:26 PM
03GT35R's Avatar
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Posts: 299
Likes: 0
Received 4 Likes on 3 Posts
I may be in luck, called uprev and they are telling me to bring the car to Forged Performance in Atlanta to do an ECU dump so they can look at the data and see if it can be tuned..Crossing Fingers!!!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
04-23-2018 11:13 AM
atomevolution
Engine - Exhaust
1
10-12-2015 01:00 PM
Learned Hand
G35 Sedan V35 2003-06
1
10-01-2015 09:02 AM
Detailed Image
Care & Detailing
0
09-28-2015 07:04 AM
vamarris
Engine, Drivetrain & Forced-Induction
0
09-26-2015 12:56 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Throwing Codes P0138 & P0037



All times are GMT -4. The time now is 10:01 AM.