Car at IDLE...
sen jen, you in Kunia too? If you're going to be home on Friday afternoon I can do you car too. shoot me a pm, and we can exchange numbers.
636racer, as long as it's a OBD2 scan tool it should work, the one I got (auto enginuity) also has CAN so it will work on basically every car since 96' including the 04's and 05' that went to CAN. I picked up a palm version, didn't want my laptop flying around the car while taking a turn. what's really cool about it is that it can dyno and time your car based on the speedometer/odometer so it's more accurate then the accelormeter types.
636racer, as long as it's a OBD2 scan tool it should work, the one I got (auto enginuity) also has CAN so it will work on basically every car since 96' including the 04's and 05' that went to CAN. I picked up a palm version, didn't want my laptop flying around the car while taking a turn. what's really cool about it is that it can dyno and time your car based on the speedometer/odometer so it's more accurate then the accelormeter types.
Thread Starter
|
Registered User
Joined: Jul 2004
Posts: 2,985
Likes: 2
From: 671 to 808
Originally Posted by DHCrocks
eh Jeremy, sorry I didn't get back to you sooner, was so busy during the holidays. still got that CEL light on? The stock tachs are usually not that accurate so it may not be reading right, I'll be home around 3pm on Friday. If you're around give me a call and we can hookup the OBD2 scan tool to check your actual RPM and reset your CEL and see if there are any other trouble codes.
Thanks..
Registered User
iTrader: (1)
Joined: Jul 2004
Posts: 2,475
Likes: 0
From: 21°18'54.33" N, 158°05'55.47" W
Originally Posted by DHCrocks
sen jen, you in Kunia too? If you're going to be home on Friday afternoon I can do you car too. shoot me a pm, and we can exchange numbers.
636racer, as long as it's a OBD2 scan tool it should work, the one I got (auto enginuity) also has CAN so it will work on basically every car since 96' including the 04's and 05' that went to CAN. I picked up a palm version, didn't want my laptop flying around the car while taking a turn. what's really cool about it is that it can dyno and time your car based on the speedometer/odometer so it's more accurate then the accelormeter types.
636racer, as long as it's a OBD2 scan tool it should work, the one I got (auto enginuity) also has CAN so it will work on basically every car since 96' including the 04's and 05' that went to CAN. I picked up a palm version, didn't want my laptop flying around the car while taking a turn. what's really cool about it is that it can dyno and time your car based on the speedometer/odometer so it's more accurate then the accelormeter types.
although my scanner software is based for the turbo regal itself, nothing more. i'll look more into auto enginuity.
Thread Starter
|
Registered User
Joined: Jul 2004
Posts: 2,985
Likes: 2
From: 671 to 808
Originally Posted by XLR8SN
And............the results were............. 
Thread
Thread Starter
Forum
Replies
Last Post
Tolboothwilley™
Exterior-Vendor
6
Jul 28, 2016 12:42 AM
marsman328
Northern California
1
Aug 11, 2015 07:29 PM
