Can someone point me to the correct location where there might be step by step instructions on installing the Intake tube..

Thanks

 

I am looking for the same thing. Is there anyone who has posted instruction on how to do this for the Not so Mechanically inclined?

 

Dudes, it's easy. I've never worked on cars before the G. It took me all of 15 minutes. It's just a few screws .

 

You were right.. ABout 30 minutes

 

i hear everyone talking about this. Can someone please show me what it is? picture website i dont care. I heard it adds a lil bit of horses so i really wanna know. HELP?

lol

2004 Diamond Graphite G35 Coupe 6MT, Premium Package, Aero Package, DVD Nav

 

I would like to see some pics of it too

 

There are pictures of it all over the place! Do a search.

2003 Twilight Blue 5AT Sedan, sunroof,
Graphite Leather, splashguards,
GG/DB red 12 wire Hyper-grounding kit,
350Z intake duct, Stillen Hi-Flow Airbox

 

Here are my original pics from early May.

<font color=blue>Dan</font color=blue>

113142-InletDuct_B.jpg

 

Here is the other one.

<font color=blue>Dan</font color=blue>

113143-InletDuct.jpg

 

thats it. So forget that i ordered an injen cold air intake. Thanks anyways for showing some pics. SOme people are very helpful. Aprreciate it.

2004 Diamond Graphite G35 Coupe 6MT, Premium Package, Aero Package, DVD Nav

 

Well I just did the 350Z intake mod this afternoon took maybe 10 minutes. I scored on the intake, I saw a Z at a show with an Injen CAI and I asked the guy what he did with his stock one. He told me it's in his garage, so I asked how much and he's all just come by and it's yours, NO CHARGE! I love the way it sounds, real throaty. Almost reminds me of the sound of a honda with an intake mod, not that the relation is even close.

All you'll need is an 8mm and a 10mm socket. First remove the plastic plenum cover with 10mm. Then all you need to do is remove the 2 hose clamps from (1) the throttle body portion (8mm) and (2) after the Air Mass Sensor (10mm). You may wanna cut the little knobby thing on the Z intake at the throttle body side, that is meant to keep the hose clamp from spinning. It ends up not fitting to where the screw is accessable otherwise. Next you disconnect the small hose from the G intake tube, on top near the throttle. The last thing to remove the G intake are the 2 mount screws, both 10mm, one on the plenum the other to the right at the Air Mass Sensor end. Next be sure the 2 clamps are in place on the Z intake and connect the small hose first, then the flex end near the Air Mass Sensor. Last the throttle body portion. make sure all the clamps are tightened and replace the mounting screws. Start your engine, listen and enjoy.

P.S.
For those who care. I drive a Silver Sedan 6MT CA license plate "KRZ HAYN" = "Krazy Hawaiian". A "Shaka" is always welcome.