Intake & Exhaust Questions and info regarding various aftermatket exhaust systems for the G35 (Headers,Y-Pipes, and Cat-Back Systems)

Swapped Injen CAI for Z tube

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #16  
Old 05-25-2004, 11:00 PM
SixFive's Avatar
Registered User
Thread Starter
iTrader: (3)
Join Date: Mar 2003
Location: Philly
Posts: 2,873
Received 0 Likes on 0 Posts
Re: Swapped Injen CAI for Z tube

OK now that I have ACTUALLY modified the G tube to be an almost Z tube GDAMMIT the growl is good! I realized that the top resonator actually was a resonator after pulling the bottom one off and thinking I was done. The hole plug for the top resonator makes this mama come alive! I just went out for a run in the 75 degree post thunderstorm evening MAN. After the airbox mod with some new rubber sealinj around it and some modifications to my custom hood liner to allow some more air in where I had too much in the way...jeez oh K&N rocks

...forget the Injen I'm done with it.

This sound is better - less strain at the top -- better sound down low - not so mustang GT. The pull is just as much there as with the Injen if not better. Slightly so but the airbox mod and K&N are good for a couple HP I believe. Keeping the Z tube!



2003.5 DP 5AT Sedan (E-thing but Nav)
14.2 @ 97.18
Z-Tube
K&N Drop In
10 Wire Hyper-Ground
Crawford Plenum (V4)
UR Crank Pulley
Polk ex-3500 Tweeter Upgrade/Shock Sensor/H-Liner Under Hood
 
  #17  
Old 05-25-2004, 11:29 PM
I_Got_EVO's Avatar
Registered User
Join Date: Dec 2003
Location: Philadelphia suburbs
Posts: 260
Likes: 0
Received 0 Likes on 0 Posts
Re: Swapped Injen CAI for Z tube

yo sixfive. it's evo kid. that was my dad in the red G35C with exhaust over the weekend. check my pics (clicking on my username) and i'm sure u'll recognize the G. small world.

 
  #18  
Old 05-26-2004, 02:29 AM
klg35's Avatar
Registered User
Join Date: Jul 2002
Location: Walnut, the one in So-Cal
Posts: 669
Likes: 0
Received 0 Likes on 0 Posts
Re: Swapped Injen CAI for Z tube

thanks for the plug-in Six-Five, this is how it all started:
https://g35driver.com/forums/showfla...sed&sb=5&part=

i knew that the stock intake set up was already pretty good, and from the dynos from the Florida guys, there wasn't much gain, if any, by going after market..Florida dyno guys, chime in anytime!



04 6mt Sedan / stock airbox mod / z-tube / k&n panel filter / crank pulley / 18" r/h c2s / s-tein springs

263667-stock air box mod 002.jpg
 
  #19  
Old 05-26-2004, 02:37 AM
klg35's Avatar
Registered User
Join Date: Jul 2002
Location: Walnut, the one in So-Cal
Posts: 669
Likes: 0
Received 0 Likes on 0 Posts
Re: Swapped Injen CAI for Z tube

neffster, that's actually what i got, except that i removed that power duct piece from the stock box......and like sixfive said, the growl is pretty d@mm cool too!


04 6mt Sedan / stock airbox mod / z-tube / k&n panel filter / crank pulley / 18" r/h c2s / s-tein springs
 
  #20  
Old 05-26-2004, 08:00 AM
SixFive's Avatar
Registered User
Thread Starter
iTrader: (3)
Join Date: Mar 2003
Location: Philly
Posts: 2,873
Received 0 Likes on 0 Posts
Re: Swapped Injen CAI for Z tube

Evo Kid - that car sounds bad to the bone....If i had a coupe I would buy that exhasut just for the sound and look....schweeeeet. I could hear him BEING GENTLE on the throttle driving down chemical road a couple of lights. I stopped trying to hear hom before I went in dam store! You guys need to mod the intake like we are...

Also if you go to ardmore inifiniti the guys in the shop DIG your setup - they were ranting about it a couple mos ago.



2003.5 DP 5AT Sedan (E-thing but Nav)
14.2 @ 97.18
Z-Tube
K&N Drop In
10 Wire Hyper-Ground
Crawford Plenum (V4)
UR Crank Pulley
Polk ex-3500 Tweeter Upgrade/Shock Sensor/H-Liner Under Hood
<P ID="edit"><FONT class="small"><EM>Edited by SixFive on 05/26/04 05:06 AM.</EM></FONT></P>
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davizzle
Media Share G35 Coupe V35
23
05-22-2022 09:26 AM
davizzle
Picture Share
23
02-04-2018 12:41 PM
davizzle
Video Share
5
01-31-2017 04:00 PM
Ninjay16
Engine - Intake/Fuel
7
01-14-2016 01:44 AM
prinny
The G-Spot
6
11-22-2015 11:07 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Swapped Injen CAI for Z tube



All times are GMT -4. The time now is 03:33 PM.