injen exhuast w/x pipe
#1
#2
Red Card Crew
iTrader: (24)
I believe it's been done on the Z more than a few times. It also depends on which X pipe you use. A straight X pipe is pretty small while a resonated X pipe (looks like a 2in/2out muffler but with a true x pipe inside) are usually longer. But you might gain some room if you go with the resonated X and dump the Injen resonators?
The only problem I see is that the H pipe is welded in right at the bends of the downpipes. But any shop should be able to handle it.
The only problem I see is that the H pipe is welded in right at the bends of the downpipes. But any shop should be able to handle it.
#4
#5
Was the X-Pipe a Magnaflow #11385? I just installed my exhaust yesterday and it has a lot of drone but it doesn't bother me that much. I do have a lil rasp on mine since I do have test pipes added in. I thought I might try to make it a lil quieter and maybe eliminate the lil rasp that I have. The rasp dropped by 50% since the install of the new exhaust.
#6
now that i remember it was non-resonated xpipe just before the the resonators on the injen, if your trying to add a resonated xpipe you would have to cut out the h-pipe and resonators on the injen and replace with magnaflows resonated xpipe.
kinda like what dcityjatt did to his xo2 different exhaust same principal.
https://g35driver.com/forums/intake-...est-pipes.html
kinda like what dcityjatt did to his xo2 different exhaust same principal.
https://g35driver.com/forums/intake-...est-pipes.html
#7
That's what I was planning on doing. The diamater of the pipe is 60mm which is 2.38". Would I need to get a 2.5" or 2.25" X-Pipe muffler? If that doesn't work completely maybe another resonator down the pipe but from what I have been reading and researching is that that X-pipe is a miracle worker lol. So maybe hopefully in a month I will have it on and will post sound clips of before and after. How much should I be looking at to replace all of that?
now that i remember it was non-resonated xpipe just before the the resonators on the injen, if your trying to add a resonated xpipe you would have to cut out the h-pipe and resonators on the injen and replace with magnaflows resonated xpipe.
kinda like what dcityjatt did to his xo2 different exhaust same principal.
https://g35driver.com/forums/intake-...est-pipes.html
kinda like what dcityjatt did to his xo2 different exhaust same principal.
https://g35driver.com/forums/intake-...est-pipes.html
Trending Topics
#8
try the 11386* it's 2.5 vs. the 2.5 of the 11385* as far as price here is a example http://www.ourdealsrock.net/256-11386.aspx but labor and all that i wouldn't know. good luck bro post vids when complete.
Thread
Thread Starter
Forum
Replies
Last Post