Originally Posted by drsifu1

first off...not another bunch of cars running the kenstyle body kit. Why oh why!!! *done ranting*

yeah...had to figure how to wire that stuff myself.

DISCLAIMER: I AM NOT a professional, but will tell you how I wired my Kenstyle fog lights.

you have several options. wire them to turn on with the G35 foglights or have them on with the parking lights or have them on when you turn on the regular lights. i didn't do it any of these ways, so if you want, you'll need to ask someone else. i'm sure you can just tap the wires for these respective lights, but not sure how safe that is.

instead, i bought a switch that allowed me to control the foglights separate from the G35 oem lights. all equipment was bought at the local Autozone/Kragen/PepBoys.

the little plugs at the end of the wires...I just cut off.

You'll need to buy a relay.

http://www.classictruckshop.com/club...h/foglites.htm

i followed a diagram similar to the one above. i forgot what size fuse I used. there's more info on the net in regards on how to wire foglights. think of these as generic foglights you would buy to add to any car, with the exception that these did not come with a switch or relay

each of your kenstyle has it's own ground wire. i just ran each of them along with the ground for the relay to one part of the chassis.

geez..it's been so long i don't remember the exact details.

well...not the most helpful post, but hopefully i got you in the right direction.

Basically you need to buy the following to do it yourself:

1- relay
2- fuse holder
3- fuse
4- wire crimper/cutter/stripper
5- electrical tape
6- butt connectors and wire taps
7- switch
8- you might need extra wires