Does anybody have a DIY or instructions on how to remove the front bumper and install the customautomesh.com mesh? Thanks

 

look up triji, he has a DIY on installing headlights, which shows u how to remove the bumper.

 

to remove the bumper (mostly)

https://g35driver.com/forums/body-interior-exterior-lighting-diy/125363-diy-headlight-housing-removal.html

dremel the stock mesh out. install the customautomesh hardware that you should have bought. slap in the mesh. boom, youre done.

 

so no jack required?

 

nope.

 

Make sure to put towels over your bumper edges (where they meet the fender). If not, you will scratch up your fenders.

 

Thanks for the answers!

 

STOPPP..dont do it.. i put the custom auto mesh on my old stock bumper and the only benefit was that i had a $hit load of bugs and leafs in my lower grills!

 

... my bumper would not come off and I followed the instructions exactly! FACK!!!

 

Here is the DIY for the headlights, take a look at it... The only thing you need to do different for removing the whole bumper is to use a 10mm rachet to remove the bolts right under the front bumper that holds the plastic engine undercover on.

You can also use a 10mm rachet if you have a long enough extension on the rachet to get the 4 bolts (2 on each side) that hold the fender to the bumper on the sides instead of the long phillips.

https://g35driver.com/forums/showthread.php?t=125363


I hope this helps you




Jining... Where did you get stuck at?.... Bumper should come right off... takes very little time to do...

 

well i did use a phillips to remove the 2 on each side in the wheel wells and each side of the bumper would nearly come off but it seemed as the bumper was still bolted onto something. and yes I took out the 2 plastic clips as well :0/

 

no ****!!! i have that same issue

 

Did you take out the pop rivits along the top of the grille? There are like 6 up there , also did you take the side marker lights out?

 

oops.... I did not click on the link aHero4Eternity posted up there....

He beat me to it