how to modify signal lights to only turn on when signalling?
#17
Ya like i posted before, u just have to work on the bulbs so it wont mess anything up. I have electrical tape covering the 2 middle connections on the bulb, tomorrow i will try to dremal them off. But i will take them out tomorrow and take pixs of both ways and pixs of the result.
example of bulb: on the base there are for metal connections like this | | | | so i used elc. tape to cover 2 of them so now the only connection are these | X X |, but ill sow pixs tomorrow.
example of bulb: on the base there are for metal connections like this | | | | so i used elc. tape to cover 2 of them so now the only connection are these | X X |, but ill sow pixs tomorrow.
#19
Not hard put u can reach the passenger side under the hood, but the driver side u will need to go through the wheelwell. I recommend to use the electrical tape method. I couldnt wait for mornin so i just tried to grind them off but i cut to much and the bulb turned smoky inside, but if your careful with a dremal (which i didnt find mine to use) just cut the connections.
here the link to imagestation where i just put up the pixs. (u will need to sign up)
http://www.imagestation.com/album/pi...?id=2129587995
here the link to imagestation where i just put up the pixs. (u will need to sign up)
http://www.imagestation.com/album/pi...?id=2129587995
#23
#24
Update: if you dont want to use the electrical tape, I found out if you cut the middle connections really close to the glass that will work too. I checked out the plug and the contact is only on the flat side of the bulbs, so if you cut them short and point them straight down would work too.
#25
I'm bringing this thread back from the dead, but I found another way to do this. I bought some 15 LED replacement bulbs (superbrightleds.com) to go in the front turn signals, after I installed them (along with a Load Resistor kit) my turn signals now only turn on when I activated them. I wasn't going for this at first, I just wanted LED turn signals, but now I've gotten used to it. Anyway, for more details or pics PM me.
#29
7440-15 LED bulb http://www.superbrightleds.com/cgi-b...1.27001&next=0 scroll down to the bottom and you'll see the one I'm talking about.
#30