Just checking on the status.. want my mirrors to fold in and tilt down already!

Sorry, I kind of dropped the ball on this one. I got tint installed on on 7/8, and they melted my passenger door panel so I have been working on that. :mad:

I want this too. I am taking my car to the dealer next week to get the door panel replaced so I will check on the part numbers to see what exactly we need to order. Yoshi san gave me a huge list of part numbers (without part names or schematics) that I need to cross check so we don't buy parts we don't need.

I am surprised no one asked what happened to me sooner. :p

We just assume you take full responsibility in ordering the Japanese parts and installing them yourself and then doing a full DIY guide and then maybe helping us when we try to do it ourselves. Seemed obvious to me :p

Great Post... Keep me posted.. I am in purchasing that Mirror mod.

By the way, what is the remote entry light? Is it like in the picture shown in blue????

Any idea on the heated mirrors bit?

My wife has a TL. Only one mirror tilts down. The mirror that tilts down, is dependent on which mirror the switch is set to. If you leave it in the middle, then neither mirror will tilt down.

Good point...what was I thinking? :p I will defintely make a DIY guide when I do it so I can sell the guide for $10 each...J/K :D

I am most worried about the fold in feature, but the tilt down should be a breeze to install. :cool:


Yes, the blue light that shines on the ground from the mirror is the remote entry lights.

Sorry, I am not following you. Are you referring to the heat function that we already have? If so, it will be untouched.

This is my understanding too for the V35 kit too. If not, we can always do some simple wire splicing to make it work this way. ;)

Well, I did go to the dealer last Thurs., but I totally forgot to check the part numbe list while I was there. If anyone passes by an Infiniti dealership on their way home from work or something, stop in there and see if any of the below part numbers are used on the US models. I have to drive about 25 minutes out of my way, and then, the extra 25 minutes back so it adds up to almost an hour. I might try to run over there this weekend, but I am not making any promises ;) .


mirror assy RH
96301-AC618
96301-AC619
96301-AL501
96301-AL502
96301-AL503
96301-AL504
96301-AL505
96301-AL506
96301-AL507
96301-AL508
96301-AL509
96301-AL510
96301-AL511
96301-AL512
96301-AL517
96301-AL602
96301-AL603
96301-AL604
96301-AL605
96301-AL606
96301-AL607
96301-AL608
96301-AL609
96301-AL610
96301-AL611
96301-AL612
96301-AL617
96301-AM905
96301-AM908
96301-AM910
96301-AM915
96301-AM965
96301-AM968
96301-AM975
96301-AM976
96301-AQ013

Power fold unit for mirror
96370-AL900/96369-AL900
96370-AM900/96369-AM900

Glass mirror
96365-AL600
96365-AL900
96365-AL910
96365-AM900
96365-AM960

Mirror holder
96394-AL900

Tilt Switch
25570-CD000

Only the mirror housing is unavailable.

Anything ever come of this?

Personally? I just want fold-down mirror on when in reverse (TL-style, based on selector switch position)

Thanks for your hard work and research!

I just finished reading the entire post (phew!). Yeah, this all sounds interesting. Now I'm curious about all this! Wonder what is going on with this now too.

As did I - took two cups of coffee to get through!

HAHA. I had one LARGE cup of coffee and a muffin!

hmmm...so whats the status so far???

so did the OP lose interest in doing this? too much work getting the parts maybe??

i was really hoping to have this done. :(

me too.