Where do I get those overlays for the CLEAR CORNERS that have the 3 DIAGNOL stripes?
#1
Join Date: May 2004
Location: Southern California
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
#4
no problem! if you dont think you can install it yourself, he can do it for you. the 1st set i got, i fvcked up cause i didn't know how to do it. so i bought a 2nd set from him and he was kind enough to install them for me. i had to send him my lights though. which was no biggie. he is awesome to work with. he always kept me updated every night and some teaser pics too! great guy! really recommend him.
#5
Originally Posted by g356spd06
no problem! if you dont think you can install it yourself, he can do it for you. the 1st set i got, i fvcked up cause i didn't know how to do it. so i bought a 2nd set from him and he was kind enough to install them for me. i had to send him my lights though. which was no biggie. he is awesome to work with. he always kept me updated every night and some teaser pics too! great guy! really recommend him.
Hey thanks for the compliments. Dennis_said will be getting his overlays in the mail soon. Thanks alot guys.
Dan
#7
Registered User
iTrader: (40)
Join Date: Jan 2004
Location: 626!
Posts: 3,874
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#9
Join Date: May 2004
Location: Southern California
Posts: 1,006
Likes: 0
Received 0 Likes
on
0 Posts
#10
Install is straight forward. Pm me for any specific questions.
Clean the light lens with a non alcohol cleaner, dry, spray on a mild soap/water solution, apply overlay, position overlay, use soft cloth to push water away to edges, make sure all bubbles are smoothed out........ You can let it sit for a while to make sure everything is dry or just procede depending on how you think its working out.
Hardest part now is heat edges with hair dryer and smooth the vinyl over the edges with the soft cloth, trim any tiny excess vinyl with a razor, repeat the heating a smoothing, and your done.
I make it sound super easy but take your time, vinyl can get delicate when warm. Patience is the key. Don't force anything.
Clean the light lens with a non alcohol cleaner, dry, spray on a mild soap/water solution, apply overlay, position overlay, use soft cloth to push water away to edges, make sure all bubbles are smoothed out........ You can let it sit for a while to make sure everything is dry or just procede depending on how you think its working out.
Hardest part now is heat edges with hair dryer and smooth the vinyl over the edges with the soft cloth, trim any tiny excess vinyl with a razor, repeat the heating a smoothing, and your done.
I make it sound super easy but take your time, vinyl can get delicate when warm. Patience is the key. Don't force anything.
Thread
Thread Starter
Forum
Replies
Last Post