Inputs on drilled pedals, plase
Re: Inputs on drilled pedals, plase
they are bad a$$. an instant 15 rwhp! JK.
they are the same as the z pedals, you can go to any nissan dealer and get them just make sure you get the right ones. AT & MT with clutch. they do look nicer, as far from anyone else seeing them or caring about them other than us G owners, i doubt it. if i had never seen the original flyer for the coupe that had the alluminum pedals i probably would of never bought them.
they are the same as the z pedals, you can go to any nissan dealer and get them just make sure you get the right ones. AT & MT with clutch. they do look nicer, as far from anyone else seeing them or caring about them other than us G owners, i doubt it. if i had never seen the original flyer for the coupe that had the alluminum pedals i probably would of never bought them.
Re: Inputs on drilled pedals, plase
Look at AutoVation pedals @ autovation.net. They have sets for both the 5AT and the 6MT. 2 designs. One says G35, the other has the Mt. Fuji Logo. The 5AT one has a pedal for the E Brake. I have a set on my 6MT. I like the look better than the Nissan one, and not everybody has them. Also the Gas Pedal is bigger for better heal and toeing. I get complements from every one who sees them.
Lou
Lou
Re: Inputs on drilled pedals, plase
These are my pedals, they are nissan and you can get them from StrictlyZ.com, it does not come with a parking brake piece, that is my own creation.
Limeg35 has a diferent looking set, depending on what you like, both sets look nice, and there is I'm sure more choices out there.
82435-aluminum pedals.jpg
Limeg35 has a diferent looking set, depending on what you like, both sets look nice, and there is I'm sure more choices out there.
82435-aluminum pedals.jpg
Re: Inputs on drilled pedals, plase
there is no drilling to be done with the Nissan pedals, you take the old ones off and replace them, the price was i believe around 70 dollars from Strictlyz.com, the parking brake pedal has a little hole in the middle an I used it to secure my custum pad, the pb pad is not included in the pedal kit, also there is a couple of bushings for the accelerator pad, inquire about it, oher wise its a piece of cake to install.
Re: Inputs on drilled pedals, plase
definitely get the drilled racing pedals. perhaps you can even get the dealer to throw them in for free. they really improve the interior of the car. before i installed them, looking down at the black rubber pedals, it looked really plain and boring.
Trending Topics
Re: Inputs on drilled pedals, plase
I recommend getting the pedals. They are about $90 for the 6MT and about 1 hour to install them for a 1st timer. If i had to do it again, it would take me only 10 minutes to do, seriously.
Checkout this pic. It is well worth the money, i wouldnt have it any other way! Got so sick of the black rubber stock pedals.

<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow/Grounding Kit
Checkout this pic. It is well worth the money, i wouldnt have it any other way! Got so sick of the black rubber stock pedals.

<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow/Grounding Kit
Re: Inputs on drilled pedals, plase
I ordered mine today from www.courtesyparts.com I ordered the bushing and clip they have the entire set for about $65.00 for the AT plus shipping.
www.nissanparts.cc have them for $58.49 plus shipping but they didn't answer my emails.
www.nissanparts.cc have them for $58.49 plus shipping but they didn't answer my emails.
Joined: May 2003
Posts: 3,653
Likes: 5
From: Sugar Land,Texas
Re: Inputs on drilled pedals, plase
RamboRami,
What kind of pedals are yours and where did you get them.
I want a set for my 5AT.
Cato
2003 Twilight Blue Sedan 5AT, sunroof, leather,
splashguards, GG red 7 wire Hypergrounding kit, 350Z intake duct, K&N filter.
What kind of pedals are yours and where did you get them.
I want a set for my 5AT.
Cato
2003 Twilight Blue Sedan 5AT, sunroof, leather,
splashguards, GG red 7 wire Hypergrounding kit, 350Z intake duct, K&N filter.
Re: Inputs on drilled pedals, plase
Cato:
I have the same pedals of RamboRami They are Nissan OEM I ordered mine from www.courtesyparts.com The 5AT set including bushing and clip for $66.00 plus shipping.
www.nissanparts.cc has them for less but I emailed and they didn't reply me, but they have a phone number if you wanna check you have to use the OEM PART #
18016-AB010
67840-CD011
46531-AB001
18014-AB000
18014-8H601
Re: Inputs on drilled pedals, plase
Cato:
There was an error in my previous message, the brake pad Item number is 46531-AB010
Check on http://www.smiley.net/g35/pedals.htm if you need help for install them.
There was an error in my previous message, the brake pad Item number is 46531-AB010
Check on http://www.smiley.net/g35/pedals.htm if you need help for install them.
Thread
Thread Starter
Forum
Replies
Last Post





