Routing outside sideskirt wires into the cabin
i still havent recieved any feedback as to how to run them..i saw people cutting holes in there side skirts..i wasnt sure i would want to do that.
Trending Topics
Originally Posted by g35man04
is that his name Calvin on here? sen_jen?

you can also ask jdbinspired how he did his. here is his car. before anyone asks, it's bagged.

however, both people have sold their cars and may be difficult to get a hold of. i believe they both still log on driver periodically, though.
Last edited by Calvin; Nov 27, 2007 at 11:01 AM.
I didn't use any brackets for mines.
-Grabbed some PCV pipe from the local hardware store. Cut holes in my sideskirts(make sure the holes are smaller the then pipe).
-Cut the PCV pipes at about 1" in length. siliconed the puddle lights to the top of the pipe facing down and then siliconed the other end of the pipe to the inside of the sideskirts.
-I ran the wires from the sideskirts through under the door sills, through the panel with the fuse box, Up the side of the dash, through the door pillar, through the roof liner and tapped it into the dome lights. Installing it to the dome is what i would suggest. So when you open the doors. Lights come on. when the dome lights fade to off, so will the puddle lights.
-Sorry no pictures and for the bad explaination. Did it a real long time ago...
-Grabbed some PCV pipe from the local hardware store. Cut holes in my sideskirts(make sure the holes are smaller the then pipe).
-Cut the PCV pipes at about 1" in length. siliconed the puddle lights to the top of the pipe facing down and then siliconed the other end of the pipe to the inside of the sideskirts.
-I ran the wires from the sideskirts through under the door sills, through the panel with the fuse box, Up the side of the dash, through the door pillar, through the roof liner and tapped it into the dome lights. Installing it to the dome is what i would suggest. So when you open the doors. Lights come on. when the dome lights fade to off, so will the puddle lights.
-Sorry no pictures and for the bad explaination. Did it a real long time ago...
Thread
Thread Starter
Forum
Replies
Last Post
Ninjay16
Audio/Video/Electronics
11
Feb 26, 2018 06:14 PM
Hogbone
Engine, Drivetrain & Forced-Induction
2
Sep 28, 2015 06:44 PM





