DIY: G35 Sedan HID and HID Fog Installation
#16
Question so when the HID are installed on the fogs lights will it interfere with the stock HID?? Like will there be any major electrical issue because both HID are running and they are drawing alot of wattage??
Also have any one had any problems with DDM Tunnng Ballast i had a DDM Tunning kit before and had it in my civic ( Back when i had one) and it totally fried my fuse box has any one had this happen?? Does that mean my Ballast is bad?? And what if still works if i test it should i re-use the ballast. Cause the civic head lights are the same bulb size as Our G35 fog lights. Also is there any fuses or relay we can put in between the wires just in case like and electrical surge happens??? Any thoughts???
Also have any one had any problems with DDM Tunnng Ballast i had a DDM Tunning kit before and had it in my civic ( Back when i had one) and it totally fried my fuse box has any one had this happen?? Does that mean my Ballast is bad?? And what if still works if i test it should i re-use the ballast. Cause the civic head lights are the same bulb size as Our G35 fog lights. Also is there any fuses or relay we can put in between the wires just in case like and electrical surge happens??? Any thoughts???
#17
#18
I had a 99 ek civic coupe and near the battery was a fuse box that had the batter cables running into it to power the other electrical components in the car and that box like melt fuses and one of the cables the negative one that ran from the battery to the fuse box melted through the plastic housing of the fuse box. Yeah so i dont know it there will be and electrical interference with both HID running. And when you say relay where would i put that relay and what kind of relay would I use??
#19
Ermmm something was wrong there, fuses werent doing their job if they allowed wires to melt. You didnt put higher amp fuses in did you?
I have 2 HID kits in my mazda, no problems there.
This is the harness Ive been using: http://www.ebay.ca/itm/180736723307?...ht_2203wt_1111
I would recommend getting someone else to do it this time. You dont want the same thing happening to your G.
I have 2 HID kits in my mazda, no problems there.
This is the harness Ive been using: http://www.ebay.ca/itm/180736723307?...ht_2203wt_1111
I would recommend getting someone else to do it this time. You dont want the same thing happening to your G.
#25
Question so when the HID are installed on the fogs lights will it interfere with the stock HID?? Like will there be any major electrical issue because both HID are running and they are drawing alot of wattage??
Also have any one had any problems with DDM Tunnng Ballast i had a DDM Tunning kit before and had it in my civic ( Back when i had one) and it totally fried my fuse box has any one had this happen?? Does that mean my Ballast is bad?? And what if still works if i test it should i re-use the ballast. Cause the civic head lights are the same bulb size as Our G35 fog lights. Also is there any fuses or relay we can put in between the wires just in case like and electrical surge happens??? Any thoughts???
Also have any one had any problems with DDM Tunnng Ballast i had a DDM Tunning kit before and had it in my civic ( Back when i had one) and it totally fried my fuse box has any one had this happen?? Does that mean my Ballast is bad?? And what if still works if i test it should i re-use the ballast. Cause the civic head lights are the same bulb size as Our G35 fog lights. Also is there any fuses or relay we can put in between the wires just in case like and electrical surge happens??? Any thoughts???
I had a 99 ek civic coupe and near the battery was a fuse box that had the batter cables running into it to power the other electrical components in the car and that box like melt fuses and one of the cables the negative one that ran from the battery to the fuse box melted through the plastic housing of the fuse box. Yeah so i dont know it there will be and electrical interference with both HID running. And when you say relay where would i put that relay and what kind of relay would I use??
2. Your questions are poorly formed and give useless information, if you have a question, state it and throw in some punctuation and proper spelling.
3. I bolded the things you wrote that show you dont know what you are talking about, I was trying to help, but **** it, maybe you will find a way to melt your G35s wiring too.
Last edited by DVG; 11-20-2012 at 05:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post
laksjd84
Exterior - Body Parts
1
07-24-2015 05:12 PM