How would you know if you're adjusting it properly?? Is there like a guideline? My car is dropped as well..

 

The headlights come prealigned with the passenger headlight aimed a tad higher than the drivers side. I just evened them up as perfect as I could get em. I am lowered too so instead of bringing the right one down you may wanna bring the left one up. Note: this pic shows the right headlight a tad higher up. They come this way on purpose.

 

So is there a chance that it'd just be fine w/o any adjustments needed? Cuz I see the silver bolt that you're speaking about to adjust the headlights, however it doesn't look like it can be done w/o removing the headlight!

 

I think you will be fine. I did mine outta preferance not outta necessity.

 

Will I be able to use my '04 ballasts on the '06?

 

Yes but you wont need to, they come with ballasts.

 

Reason why I asked was to save me time on the install so I won't have to take out my '04 ballasts if I don't have to. Thanks.

 

INSTALLED mine just now after I had to do a willcall pickup at UPS =)

I was so anxious had to do it at night!!! Seeing the lights from a distance is quite an experience! I had my dad drive it down the street so I'd see it

 

lol i was in the same boat as you man! i installed my lights and everything around 7ish. took longer cuz it was dark and poor lighting lol

but i just HAD to see em @ night already lol im glad i did!

 

Gotta get some new 168s for the CLEAR CORNERS ow... for some reason when I opened up the clear corner the PIAA SUPER WHITES I had in their was all f'ed up the blue film covering the bulb was eaten up--heat perhaps? I need a set of GTXs now to match my city lights... wsa this something that just happened w/ time?

 

The ballasts are attached to the bottom of the headlights. They come out together.

 

The remaining bulbs and the housings arrived today. The boxes are huge. Everyone ar work was asking me what I got. They think I'm kinda weird ordering car parts.

Off to put them on now.

 

your so lucky, i'm still waiting on the h1s

 

Here's a pic of my 2006 Headlights. Took me forever to AIM them correctly. This is with the H1 Fog's Off and I am using the OEM G35 bulbs, but I sanded off the shield and cut a notch in the base to match that of the D2S. So basically I converted a D2R to a D2S. The light output it amazing.

I have:
- 194/169 PIAA Xtreme White (city lights)
- H1 PIAA Xtreme White (fog light)
- OEM Infiniti Xenon Bulb (converted to D2S)
- 7440 PIAA Xtreme White (turn signal bulbs)
- 194/169 PIAA Xtreme White (bumper lights) (clear housing)

 

I got mine on last night. It took about 2 hours start to finish. I took some pics that I'll post sometime soon.

I'm not sure if mine are aimed properly. Driving around my block it looked like the cutoff was kinda high.