I put cluster 2005 for my G 03 and dont work Open door and close door. Where is the problem?

 

I'll bite. You likely have an electrical problem.

 

the problem is this type that when I have connected 2 cables can or can h and can l be working closer in the middle of the light shaft and a door opened and closed and if odłącze for example, can l it works but again not working blinking tachometer, etc WTF?

 

No offense but the english translation of what you said makes almost no sense at all. Try typing out what you want in your native language and use a tool such as https://translate.google.com/ to convert it to english.

 

I have a problem with the position of open and closed doors. when the door is open it does not light up on the meter and does not leave the glass. What's the problem with which cables I have wrong? I will say that I did according to the scheme from this page.

 

I would start with the door switch and verify it is working. Turn the interior lights switch to automatic and when you open the door it should turn the dome light on, close the door and it should turn off. If the light doesn't turn on you probably have a bad door switch.

 

You may have the wrong cluster? the main difference is auto/6mt and navi/non navi. Also I made a revised wiring diagram that I can upload everything works 100%. also you do not have to remove the needles to get the 05+ cluster out of the housing.*

 

Its all working

 

I have G35 coupe 03 year 6mt non Navi. Or can you send me an upgrade diagram for this model?
Number 05 6mt non navi

 

I have Open door.

 

Anybody????