FS: 2.5" OEM lens for Clear Turn Signals - fits G35 Sedan
FS: 2.5" OEM lens for Clear Turn Signals - fits G35 Sedan
Got a set of fresnel (frosted) 2" OEM RX-330 lenses to replace the plastic turn signal lens.
Results in a near 100% optically clear replacement, better light output and looks great!
Fitment: G Sedan, uses 2.5" lens for turn signal replacement
$30 shipped + fees (or gifted)
Paypal: cullensc@yahoo.com
OEM 2.5" RX-330 frosted lens -- $30

OEM 2.5" FX35 lens -- $30

Installation:

Results in a near 100% optically clear replacement, better light output and looks great!
Fitment: G Sedan, uses 2.5" lens for turn signal replacement
$30 shipped + fees (or gifted)
Paypal: cullensc@yahoo.com
OEM 2.5" RX-330 frosted lens -- $30

OEM 2.5" FX35 lens -- $30

Installation:
1. Bake headlight housings and take lens apart from housing
2. Use Philips head screwdriver to remove screw securing factory plastic turn signal lens
3. Place 3" OEM lens flat on the face of the turn signal reflector
4. Hot glue around the edge of the lens to hold in place
5. Put headlights back together
Installed on my Vehicle:2. Use Philips head screwdriver to remove screw securing factory plastic turn signal lens
3. Place 3" OEM lens flat on the face of the turn signal reflector
4. Hot glue around the edge of the lens to hold in place
5. Put headlights back together
images shown below are 3" lenses (for Coupe)

Last edited by PhilsG420; May 19, 2012 at 12:41 PM.
i got 3" if you want, check my other thread: https://g35driver.com/forums/lights/...n-signals.html
more lenses added!
more lenses added!
when you bake the headlights for removal... what works best? the old hair dryer routine or something hotter? haven't gotten this far in my mods but want to
Trending Topics
figured as much... thought I'd pose the question. I like the lights.... do you have many of these or just one pair? If I buy anything else until Friday my wife is going to have a heart attack. lol
Thread
Thread Starter
Forum
Replies
Last Post




