David's IP G35 Coupe
#1
David's IP G35 Coupe
Hello all, I would like to share some photoshoots and pictures taken of my G35 coupe.
Follow me on Instagram @davidfishchuk
Or my videos on Youtube.com where I have videos of the G35: David Fishchuk
Awesome shoot done by a friend of mine locally:
Another photoshoot:
My own personal photography:
Night shoot done by another friend of mine:
One of my favorite photoshopped pictures:
Modification List:
Exterior:
Nismo Front Bumper (Custom gloss black grill inlets)
Spec-D Black Gloss Grill
Custom WRX STI V-LIP
Carbon Fiber Window Visor
Carbon Fiber Rear Diffuser
Clear Corner Bumper Lights
Side Skirt Splitters
Custom painted projector Black Housing Headlights
Suspension/Wheels:
BC BR Coilovers
STR 601 20x9/10.5 +30/+35 (offset with spacers is -2/+3)
32mm spacers all the way around
Nankang NS20 225/35-20 Front Tires
Nankang NS20 255/35-20 Rear Tires
Blue Godpseed Lugnuts
Godpseed Front Camber
SPC Rear Camber
Powerstop Drill/Slotted Rotors
PosiQuiet Brake Pads
Engine Bay:
JWC Pop Charger Intake Filter w/ Heat Shield
Stillen Ztube Intake tube
Carbon Fiber Engine Cover
Carbon Fiber NRG Hood Dampers
JDM Brake cover
Custom Blue NRG Strut Bar
Interior:
VIP Bubble shift ****
VIP pillows
VIP white Fusa and Silver Tsuna knot
custom polka dot inserts/boot from local craft store
JDM Double Din Dash Kit for OEM Navigation
JVC Double Din Unit
12" JL 12W0V2-4 300W Subwoofer
Custom Zenclosure Subwoofer Box
Alpine MRX-M110 AMP
Follow me on Instagram @davidfishchuk
Or my videos on Youtube.com where I have videos of the G35: David Fishchuk
Awesome shoot done by a friend of mine locally:
Another photoshoot:
My own personal photography:
Night shoot done by another friend of mine:
One of my favorite photoshopped pictures:
Modification List:
Exterior:
Nismo Front Bumper (Custom gloss black grill inlets)
Spec-D Black Gloss Grill
Custom WRX STI V-LIP
Carbon Fiber Window Visor
Carbon Fiber Rear Diffuser
Clear Corner Bumper Lights
Side Skirt Splitters
Custom painted projector Black Housing Headlights
Suspension/Wheels:
BC BR Coilovers
STR 601 20x9/10.5 +30/+35 (offset with spacers is -2/+3)
32mm spacers all the way around
Nankang NS20 225/35-20 Front Tires
Nankang NS20 255/35-20 Rear Tires
Blue Godpseed Lugnuts
Godpseed Front Camber
SPC Rear Camber
Powerstop Drill/Slotted Rotors
PosiQuiet Brake Pads
Engine Bay:
JWC Pop Charger Intake Filter w/ Heat Shield
Stillen Ztube Intake tube
Carbon Fiber Engine Cover
Carbon Fiber NRG Hood Dampers
JDM Brake cover
Custom Blue NRG Strut Bar
Interior:
VIP Bubble shift ****
VIP pillows
VIP white Fusa and Silver Tsuna knot
custom polka dot inserts/boot from local craft store
JDM Double Din Dash Kit for OEM Navigation
JVC Double Din Unit
12" JL 12W0V2-4 300W Subwoofer
Custom Zenclosure Subwoofer Box
Alpine MRX-M110 AMP
Last edited by davizzle; 09-30-2015 at 11:31 AM.
#5
I wish I took pictures when installing it the first time, but I used these self-tap screws.
I put the first drill in the center and worked my way out evenly on both sides, once I got to the curve in the bumper I heated up the v-lip with a heat gun and drilled it into place. Once you are done you will also need to get a saw/knife and cut off the extra lip that will stick out.
You will want this specific V-lip since the lengths change per year on the WRX, and this one is the one I used. Very affordable! 04-05 WRX V-LIP
Side skirts were about the same process. I bought one online that measured out to be my side skirt length or longer, drilled it into the side skirt and cut off the excess.
I hope this helps. Heres the one I used for example: Black Side Splitter
#6
#7
It can only be done with a bumper that has a flat surface to it, like the nismo.
I wish I took pictures when installing it the first time, but I used these self-tap screws.
I put the first drill in the center and worked my way out evenly on both sides, once I got to the curve in the bumper I heated up the v-lip with a heat gun and drilled it into place. Once you are done you will also need to get a saw/knife and cut off the extra lip that will stick out.
You will want this specific V-lip since the lengths change per year on the WRX, and this one is the one I used. Very affordable! 04-05 WRX V-LIP
Side skirts were about the same process. I bought one online that measured out to be my side skirt length or longer, drilled it into the side skirt and cut off the excess.
I hope this helps. Heres the one I used for example: Black Side Splitter
I wish I took pictures when installing it the first time, but I used these self-tap screws.
I put the first drill in the center and worked my way out evenly on both sides, once I got to the curve in the bumper I heated up the v-lip with a heat gun and drilled it into place. Once you are done you will also need to get a saw/knife and cut off the extra lip that will stick out.
You will want this specific V-lip since the lengths change per year on the WRX, and this one is the one I used. Very affordable! 04-05 WRX V-LIP
Side skirts were about the same process. I bought one online that measured out to be my side skirt length or longer, drilled it into the side skirt and cut off the excess.
I hope this helps. Heres the one I used for example: Black Side Splitter
Good looking coupe!
Trending Topics
#9
#15