Transgo Shift Kit = Smile + Chirping
Evan,
The stock oil cooler is good enough. You do not need to upgrade. If you do decide to upgrade, you should still use the existing oil cooler and just link the return to your new cooler. I have a couple oil coolers you can have (BNIB) that i got before I went 6MT.
The stock oil cooler is good enough. You do not need to upgrade. If you do decide to upgrade, you should still use the existing oil cooler and just link the return to your new cooler. I have a couple oil coolers you can have (BNIB) that i got before I went 6MT.
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
is it hard to install and do the ones you have include all the parts I need to install it?
wanna help me out with the install? Im definitely want this mod.
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
honestly z car garage will do it for a reasonable rate and its not that much for the amount of work put in. It's not hard, but tedious, and especially without a lift, I wouldn't have attempted it
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
lol you got me.. this is the first audi transmission conversion!
alright so... this is the kit I need to buy?
http://www.summitracing.com/parts/TRG-RE5R05A-HD2
http://www.summitracing.com/parts/TRG-RE5R05A-HD2
Joined: Nov 2007
Posts: 6,081
Likes: 3
From: Burlingame/Berkeley, CA
alright so... this is the kit I need to buy?
http://www.summitracing.com/parts/TRG-RE5R05A-HD2
http://www.summitracing.com/parts/TRG-RE5R05A-HD2
Thread
Thread Starter
Forum
Replies
Last Post
JG_G35
Engine - Intake/Fuel
2
Sep 7, 2015 09:35 PM
