Back for the 1st time...

Subscribe
Oct 15, 2012 | 07:03 PM
  #31  
Berk HFCs came Fri, Stillen Z-Tube and MD 5/16th Iso Plenum Spacer came in today. All will be installed in a few wks when I take it to Hills Garage in MD for a full tune up.
Reply 0
Nov 5, 2012 | 05:06 PM
  #32  
New wheels, winter set up since I hate the stock 17s. 18" 350z Ann wheels. Plasti dipped black then painted Black Pearl and finished with clear. Ichiba 25mm spacers all around, 5et Front 8et Rears. I have S Techs to put on but debating due to winter coming. Forgive my dirty pics.

Name:  20121105_113945.jpg
Views: 43
Size:  483.7 KB
Name:  20121105_113925.jpg
Views: 45
Size:  461.7 KB
Name:  20121105_113911.jpg
Views: 36
Size:  422.0 KB
Name:  20121105_113856.jpg
Views: 37
Size:  461.3 KB


Reply 0
Nov 5, 2012 | 05:09 PM
  #33  
man i hate black wheels. hate black oem wheels even more lol. so the cars not dropped? looks dropped i guess becus of the spacers?
Reply 0
Nov 5, 2012 | 05:55 PM
  #34  
I need to measure my fender height from center hub. This coupe has always looked lower than my 1st coupe. May be... I looked at the springs yesterday and they look like OEM. Oh well, doesn't matter too much at this point.
Reply 0
Nov 5, 2012 | 06:05 PM
  #35  
stock the g should be noticeably way higher. maybe its got z springs
Reply 0
Nov 6, 2012 | 01:03 AM
  #36  
I like how you update after you do something, it's really cool to see the progress you make on your car each step at a time. Looks amazing. Are you thinking about smoking the tail lights?

Where you blacked out the headlights, did you have chrome before that? I do on mine and at night it's black by itself so I'm not sure if I should black it out like yours or not.
Reply 0
Nov 6, 2012 | 11:34 AM
  #37  
Right now I want to debadged the rear fully. I am debating smoking or applying a light tint to the tails. The red looks really bright to me now that I put the black wheels on. I'm not following your question. My entire head light housing was chrome. I taped off the center because I wanted it to remain chrome then sanded the rest down. Couple coats of primer, sanded, couple coats of black pearl then clear. Done.
Reply 0
Nov 6, 2012 | 12:14 PM
  #38  
Where'd you get stock 17's from. I've only seen stock 18's and 19's on G's. But stock 17's would be great dorifto wheels. I mean, I know the 350 has'em and I could just use those, but I didn't know the G had'em.

edit: nurrrrmine. I'm assuming they came with the car when you bought it.
Reply 0
Nov 6, 2012 | 12:23 PM
  #39  
Car came with them. My original did too. I think they come with all 5AT coupes and sedans... Don't quote me on that tho. I think the 18s came with 6MT from 03-05 then the 19s from 06-07 on coupes. I'm getting rid of my 17s as well.
Reply 0
Nov 8, 2012 | 04:58 PM
  #40  
Quote: stock the g should be noticeably way higher. maybe its got z springs
Just measured and the car is lower than stock height by about 1 inch all around according to a thread on here that I found. Camber looks corrected though. I'm gonna check to see if I have aftermarket camber kits this weekend when I put my black lugs on. Good eye
Reply 0
Nov 8, 2012 | 05:24 PM
  #41  
Quote: Just measured and the car is lower than stock height by about 1 inch all around according to a thread on here that I found. Camber looks corrected though. I'm gonna check to see if I have aftermarket camber kits this weekend when I put my black lugs on. Good eye
That'd be a win for sure. Car looks great, and what a steal!
Reply 0
Nov 10, 2012 | 07:36 PM
  #42  
Thanks Seymore!
A few off topic pics from my trip to Hills Garage for my tune up and breather mod installs.
Name:  20121109_111001.jpg
Views: 38
Size:  474.5 KB
Name:  20121109_111014.jpg
Views: 35
Size:  507.9 KB
Name:  20121109_111032.jpg
Views: 105
Size:  467.8 KB
Name:  20121109_111045.jpg
Views: 50
Size:  502.7 KB
Name:  20121109_111110.jpg
Views: 48
Size:  521.8 KB


Reply 0
Nov 11, 2012 | 02:23 PM
  #43  
Repainting my grill since I forgot to add clear coat to it the 1st time and blacking out my emblem as well. In the meantime I threw my Gialla grill on and hated the wideness of the holes in the mesh and the metal bar running down the center. Sooooooo... I bought some thinner, smaller hole mesh from home depot this wknd. I removed the old mesh and the center bar then put on the new mesh and painted the grill black pearl of course. Will get some better pics once this bright a$$ sun goes down.
Name:  20121111_134218.jpg
Views: 39
Size:  457.4 KB
Name:  20121111_134233.jpg
Views: 31
Size:  423.7 KB

Also fully debadged the rear. Pissed now tho! The emblem left a rust outline so I have to buff that **** out.
Name:  20121111_134522.jpg
Views: 39
Size:  511.1 KB


Reply 0
Nov 25, 2012 | 06:35 PM
  #44  
Finally swapped out my parking light bulbs to bright white LEDs.
Name:  20121125_182337.jpg
Views: 54
Size:  169.0 KB
Also, swapped out my fogs for "Ultra White" H1 bulbs... They are just as off white as the OEM bulbs. Just ordered my HID Kit for that.


Reply 0
Dec 9, 2012 | 05:01 PM
  #45  
Picked up a VERY lightly used AAM True Dual Exhaust today. Originally made for the 350Z so my muffler guy will have to add some piping to make it work.
Name:  20121209_164851.jpg
Views: 42
Size:  468.9 KB
Name:  20121209_164836.jpg
Views: 29
Size:  534.7 KB
Name:  F10799378aaaa.jpg
Views: 30
Size:  201.1 KB
After this installed I can get my Osiris Tune and hopefully be up to around 260-270WHP like my previous coupe.


Reply 0