Registered User
before spacers they are +32 and +39. 2.5" lip front and 3.25" lip rear.
Registered User
OHHHH that's easier! I thought those specs were spacerless!
Definitely 9.5/10.5 stagger is easy in your future.
19x10 +14 4" lip
19x11 +21 4.75" lip
Would be my choice though within a couple mms of my CCW set up.
Definitely 9.5/10.5 stagger is easy in your future.
19x10 +14 4" lip
19x11 +21 4.75" lip
Would be my choice though within a couple mms of my CCW set up.
Registered User
just need to see how much lips run. Will be my winter/spring project.
Registered User
You're looking at roughly $250-$300 a lip.
Email this dude and tell him what you're looking to do. He sells quality lips where as most sell cheap lips for less money.
jefs0ng AT gmail DOT com
If not, contact Simple Wheel Werks.
http://www.simplewheelwerks.com/Home.html
Those guys are nothing but helpful, sometimes kinda slow on the phone response but they do great work.
Email this dude and tell him what you're looking to do. He sells quality lips where as most sell cheap lips for less money.
jefs0ng AT gmail DOT com
If not, contact Simple Wheel Werks.
http://www.simplewheelwerks.com/Home.html
Those guys are nothing but helpful, sometimes kinda slow on the phone response but they do great work.
Registered User
You can step lip, but you need to do a full rebarrel (front and back) as you will increase the diameter of the wheel to a 20.
But yea it can be done for like $2000, which is probably more than you want to spend but they would be the first VSKFs in 20" steps for sure.
But yea it can be done for like $2000, which is probably more than you want to spend but they would be the first VSKFs in 20" steps for sure.
Registered User
No worries man, i researched the **** outta rebuilding wheels when I was looking at all the super weak LXZs outta japan.
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
Registered User
boss! I will reface these first as they need the lovin. Lippage potentially later.
Registered User
Quote:
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
Originally Posted by 4DGS
No worries man, i researched the **** outta rebuilding wheels when I was looking at all the super weak LXZs outta japan.Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
pretty sure you seen this before since you done reserch on them lol.. but just for kicks lol

Lexus LS400, with a Youzealand SS kit
The car slams itself on a set of Tein CST, Universal Air Suspension, and ViAir compressors with a five gallon tank. The wheels are SSR Vienna Kreis 19x9 +9 in the front, and 19x10 +6 in the rear wrapped with 215/35 front and 225/35 rear tires

Registered User
Wheels are too aggressive for 11/13 build.
You'd be at a -30 on 13" with those.
You'd be at a -30 on 13" with those.
Registered User
I convinced a local guy to buy those amistad Vs. Got em for $1650 shipped!
Cars gonna look stellar next year.
Cars gonna look stellar next year.
Registered User
Excuse the filthy car, it's been nothing but rain the last 2 weeks.
23.2" rear fender to ground

23.5" front fender to ground

23.2" rear fender to ground

23.5" front fender to ground

CandlestickPark
ill Sedan
close
- Join DateJun 2007
- LocationLong Beach, SoCal
- Posts:23,261
-
iTrader Positive Feedback100
-
iTrader Feedback Score(87)
-
Likes:1,230
-
Liked:2,688 Times in 1,449 Posts
^Nuts!

