OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
OHHHH that's easier! I thought those specs were spacerless!
Definitely 9.5/10.5 stagger is easy in your future.
19x10 +14 4" lip
19x11 +21 4.75" lip
Would be my choice though within a couple mms of my CCW set up.
Definitely 9.5/10.5 stagger is easy in your future.
19x10 +14 4" lip
19x11 +21 4.75" lip
Would be my choice though within a couple mms of my CCW set up.
You're looking at roughly $250-$300 a lip.
Email this dude and tell him what you're looking to do. He sells quality lips where as most sell cheap lips for less money.
jefs0ng AT gmail DOT com
If not, contact Simple Wheel Werks.
http://www.simplewheelwerks.com/Home.html
Those guys are nothing but helpful, sometimes kinda slow on the phone response but they do great work.
Email this dude and tell him what you're looking to do. He sells quality lips where as most sell cheap lips for less money.
jefs0ng AT gmail DOT com
If not, contact Simple Wheel Werks.
http://www.simplewheelwerks.com/Home.html
Those guys are nothing but helpful, sometimes kinda slow on the phone response but they do great work.
You can step lip, but you need to do a full rebarrel (front and back) as you will increase the diameter of the wheel to a 20.
But yea it can be done for like $2000, which is probably more than you want to spend but they would be the first VSKFs in 20" steps for sure.
But yea it can be done for like $2000, which is probably more than you want to spend but they would be the first VSKFs in 20" steps for sure.
No worries man, i researched the **** outta rebuilding wheels when I was looking at all the super weak LXZs outta japan.
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
No worries man, i researched the **** outta rebuilding wheels when I was looking at all the super weak LXZs outta japan.
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
Unfortunately, my research went to waste as I found wheels with perfect specs lol
I still want to find some SSR Vienna Kries and rebuild them to 11s and 13s
pretty sure you seen this before since you done reserch on them lol.. but just for kicks lol

Lexus LS400, with a Youzealand SS kit
The car slams itself on a set of Tein CST, Universal Air Suspension, and ViAir compressors with a five gallon tank. The wheels are SSR Vienna Kreis 19x9 +9 in the front, and 19x10 +6 in the rear wrapped with 215/35 front and 225/35 rear tires






