OFFICIAL: Aggressive Wheel fitment FLUSH/STRETCH sedan
#1066
ill Sedan
iTrader: (87)
so iv decided a 225/35 on my 8.5 and 235/35 on my 9.5 ... thanks for the help marcus and johnny ...
I'm just waiting end of this weekend or beginning of next i am ordering my BC coils and from there going to figure out what kinda off set I'm going to run ..
without going to crazy what what be a good ideal offset to run and flush/aggressive with around a 3'' drop all around ??
I'm just waiting end of this weekend or beginning of next i am ordering my BC coils and from there going to figure out what kinda off set I'm going to run ..
without going to crazy what what be a good ideal offset to run and flush/aggressive with around a 3'' drop all around ??
#1067
I'm looking to run around -3 since thats around what i am now and i love it but i want to go around 3'' drop and with natural camber i will be around id say -3.3 around ...
my front with natural camber is around -2.0 and going 3'' will id say around -2.5 which is fine with me
i don't have a camber kit front nor the rear .. im trying to pull all this off without spending an every 500 for camber kits
#1068
ill Sedan
iTrader: (87)
my fenders are cut in the rear .. if you look a few pages back i posted a picture of the rear fender ...
I'm looking to run around -3 since thats around what i am now and i love it but i want to go around 3'' drop and with natural camber i will be around id say -3.3 around ...
i don't have a camber kit front nor the rear .. im trying to pull all this off without spending an every 500 for camber kits
I'm looking to run around -3 since thats around what i am now and i love it but i want to go around 3'' drop and with natural camber i will be around id say -3.3 around ...
i don't have a camber kit front nor the rear .. im trying to pull all this off without spending an every 500 for camber kits
#1069
I would say that you could do 8.5 +10 / 9.5 +15 given that info. You could go down to 8.5 +5 in the front but you would need to "pinch" and flare the front a bit. I would highly suggest getting a rear camber kit (SPC/Eibach kit goes for like $160 or so) so that you can adjust the rear camber slightly as needed (don't wan't to rub with cut fenders fo sure) and adjust your toe, thus extending the life of your tires.
with my 2.5 drop now my toe and caster is within spec ... ok then ill go ahead and buy a rear camber kit then within the week or may order it with the coils ...
anyway i can roll a little bit of the rear fenders even tho i cut them ?? like a slight roll just in case i rub ??
#1070
ill Sedan
iTrader: (87)
not may people around here do flaring/pulling ...
with my 2.5 drop now my toe and caster is within spec ... ok then ill go ahead and buy a rear camber kit then within the week or may order it with the coils ...
anyway i can roll a little bit of the rear fenders even tho i cut them ?? like a slight roll just in case i rub ??
with my 2.5 drop now my toe and caster is within spec ... ok then ill go ahead and buy a rear camber kit then within the week or may order it with the coils ...
anyway i can roll a little bit of the rear fenders even tho i cut them ?? like a slight roll just in case i rub ??
I ordered my BC coils with an SPC camber kit from a vendor on my350z.com and saved money by buying the package deal.
Depending on how much the fender is cut you may be able to roll what is left back some, but from what I understand if there isn't much left you can't really roll it.
#1072
Yeah since you don't want to "go crazy" I would stay away from flaring and pulling. With a 3" drop your toe definitely will not be in spec.
I ordered my BC coils with an SPC camber kit from a vendor on my350z.com and saved money by buying the package deal.
Depending on how much the fender is cut you may be able to roll what is left back some, but from what I understand if there isn't much left you can't really roll it.
I ordered my BC coils with an SPC camber kit from a vendor on my350z.com and saved money by buying the package deal.
Depending on how much the fender is cut you may be able to roll what is left back some, but from what I understand if there isn't much left you can't really roll it.
anything wrong with the ichiba rear camber with toe bolt ??
#1073
ill Sedan
iTrader: (87)
IIRC it was ~$1050 shipped (no tax for me since it was coming from out of state). Ichiba rear camber kit will work (I assume it includes toe bolts as well), haven't heard anything negative about it that I can remember.
#1074
ok so this is what i already ordered and picking up friday
jwt pop charger
z tube
next week or two I'm ordering
bc coils
spc rear camber
then a month or two after my new born is here "july 19th"
general tires 225/35 and 235/35
and spacers
wheel specs F - +10 ....R - +15 maybe lower if i can find someone good at pulling
the baby will be here by the time i order alot of this but i probably wont have a lot of time to get around to put this on. but ill have it all for a nice rainy day and when the baby is sleeping
then im done for a while ill be strapped with some cash ... then bonus for christmas .. i don't know yet but it will be nice :-)
jwt pop charger
z tube
next week or two I'm ordering
bc coils
spc rear camber
then a month or two after my new born is here "july 19th"
general tires 225/35 and 235/35
and spacers
wheel specs F - +10 ....R - +15 maybe lower if i can find someone good at pulling
the baby will be here by the time i order alot of this but i probably wont have a lot of time to get around to put this on. but ill have it all for a nice rainy day and when the baby is sleeping
then im done for a while ill be strapped with some cash ... then bonus for christmas .. i don't know yet but it will be nice :-)
Last edited by SN00P; 07-07-2010 at 01:17 PM.
#1075
ill Sedan
iTrader: (87)
ok so this is what i already ordered and picking up friday
jwt pop charger
z tube
next week or two I'm ordering
bc coils
spc rear camber
then a month or two after my new born is here "july 19th"
general tires 225/35 and 235/35
and spacers
wheel specs F - +10 ....R - +15 maybe lower if i can find someone good at pulling
the baby will be here by the time i order alot of this but i probably wont have a lot of time to get around to put this on. but ill have it all for a nice rainy day and when the baby is sleeping
then im done for a while ill be strapped with some cash ... then bonus for christmas .. i don't know yet but it will be nice :-)
jwt pop charger
z tube
next week or two I'm ordering
bc coils
spc rear camber
then a month or two after my new born is here "july 19th"
general tires 225/35 and 235/35
and spacers
wheel specs F - +10 ....R - +15 maybe lower if i can find someone good at pulling
the baby will be here by the time i order alot of this but i probably wont have a lot of time to get around to put this on. but ill have it all for a nice rainy day and when the baby is sleeping
then im done for a while ill be strapped with some cash ... then bonus for christmas .. i don't know yet but it will be nice :-)
#1076
#1077
ill Sedan
iTrader: (87)