The "Look what I made/installed/modified today" thread.
#981
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
#984
ill Sedan
iTrader: (87)
#986
ill Sedan
iTrader: (87)
#987
ill Sedan
iTrader: (87)
"To properly bleed the brake system, begin with the caliper farthest from the master cylinder. Bleed the outboard bleed screw first, then
the inboard. Repeat the procedure until all calipers in the system are bled, ending with the caliper closest to the master cylinder. If the
caliper is fitted with bleed screws on four corners, make sure the bottom bleed screws are tight. Only bleed from the top bleed screws."
Here are the links to the manuals Tim:
Fronts (w/14" rotors) - http://wilwood.com/PDF/DataSheets/ds547.pdf
Rears (for later) - http://wilwood.com/PDF/DataSheets/ds546.pdf
The following users liked this post:
G35Papa (06-07-2011)
#988
Registered User
iTrader: (85)
My guess is they are used to either swap out fluid (open bleeders and let the fluid drip out) or the calipers are used on other cars (besides Nissan). You can flip the caliper to the right side of the rotor for other cars.
^I can tell you've never bled brakes before
#990