i went to the axis wheel sale at there headquarters last Sunday in sante fe springs near the 5 frw and got some 20' wheels for 75 bucks a wheel my problem is the rear is 20.10 so i wrapped the rear with 2553520 tires and it rubes so bad you dont even know so im waiting for my 2453020 to come to see if that helps

 

Good deal.. Which model?

 

A 255 on a 10" wide wheel should not be rubbing. The offsets on the wheels must be really low and not made for a sedan that isnt lowered a good bit and running more neg camber.

 

if you run some neg camber it should fix it. but like he said should not be rubbing unless the offset is low.

 

Please post up some pics. How low are you? How much negative camber are you running? Are your fenders rolled flat? Offset of the wheels?

 

Most axis offsets are 10 with a +20

If he's even slightly low (1") he's going to rub as a 25mm with no camber is a straight poke, if he's on springs he's probably banging the **** out of the fenders from not having stiff dampening.

 

Roll them fenders, you should be aighht! yO!

 

ROLL them fenders !! you your car will be on point !

 

75 a wheel!! what post pics.

 

here ya go im lowered 2' front and 1.9 rear with tein s tek and tokiko shocks

 

Looks good.

$75 per wheel, you practicall STOLE them.

They are not my taste, but I think they look really good, and different from the norm!

 

they sure are different... =X
Maybe a different color would look much better, but its not bad for 75 bucks a wheel.
And you should be good to go after a fender roll..

 

You better address your fenders very soon or you are going to destroy them. You've got some work to do to make them fit properly.

However, it's hard to beat new wheels for $300.

 

20's ate my suspension alive after about a year, keep a close watch

 

Sell me the tires