Started my headlight retrofit today!!!!!!!!!!!
#127
FXR 3.0 Projectors = $140
HID Kit = $45
D2S bulbs = $10
Shrouds = $40
Miscellanous Nuts and bolts = $10
Miscellanous Glues = $20
Acrylic = $5
Single LED blue lights = $4
LED Strips = $20
CCFL Halo rings = $100
FX-R lenses = $15
Needed a dremel = $75
I think this is what I have right now. I still have paint left to do.
#128
That looks great although i think you sat the low beam projector too low, I just did my retrofit with the morimoto minis about two weeks ago. The light output difference is huge and the cutoff is even better haha. I did my retrofit for 65 dollars but I had already painted my lenses previously and already had HIDs. Here is a pic of my finished product
#130
xmystery the solenoid is supposed to be on the bottom and make sure when you paint them to let the paint cure before sealing them because if not all the gases that get released will be trapped in your headlight and cause terrible hazing inside the light, i learned this the hard way. But damn your retrofit is turning out great. How much time has it taken you?
and Max my mounts arent custom I used a morimoto mini projector and it mounts right in place of where the halogen reflector used to go, although I had to do a lot of cutting to make it sit properly
and Max my mounts arent custom I used a morimoto mini projector and it mounts right in place of where the halogen reflector used to go, although I had to do a lot of cutting to make it sit properly
#131
xmystery the solenoid is supposed to be on the bottom and make sure when you paint them to let the paint cure before sealing them because if not all the gases that get released will be trapped in your headlight and cause terrible hazing inside the light, i learned this the hard way. But damn your retrofit is turning out great. How much time has it taken you?
and Max my mounts arent custom I used a morimoto mini projector and it mounts right in place of where the halogen reflector used to go, although I had to do a lot of cutting to make it sit properly
and Max my mounts arent custom I used a morimoto mini projector and it mounts right in place of where the halogen reflector used to go, although I had to do a lot of cutting to make it sit properly
And the paint thing, yes that is very good to know. I will wait probably a week before I go ahead and mount and finish up the lights.
It has taken me I would say somewhere in the 20 hrs so far. That is a rough guess. I did have alot of tiny adjustments that took a while. I wanted to get it right the first time so I took my time. Also the fact that im a weekend warrior doesnt help either. I try to do most my work when my day job and life dont get in the way hahaha.
Oh an by the way your lights look good too!!!! Question? What shroud did you use in yours? Looks like the mini gatlin gun.
#133
That is good to know. I made to sure I was putting the solenoids in the right place and a few days ago I started to doubt myself hahaa. Just dont want to put them all together and find out they are upside down haha.
And the paint thing, yes that is very good to know. I will wait probably a week before I go ahead and mount and finish up the lights.
It has taken me I would say somewhere in the 20 hrs so far. That is a rough guess. I did have alot of tiny adjustments that took a while. I wanted to get it right the first time so I took my time. Also the fact that im a weekend warrior doesnt help either. I try to do most my work when my day job and life dont get in the way hahaha.
Oh an by the way your lights look good too!!!! Question? What shroud did you use in yours? Looks like the mini gatlin gun.
And the paint thing, yes that is very good to know. I will wait probably a week before I go ahead and mount and finish up the lights.
It has taken me I would say somewhere in the 20 hrs so far. That is a rough guess. I did have alot of tiny adjustments that took a while. I wanted to get it right the first time so I took my time. Also the fact that im a weekend warrior doesnt help either. I try to do most my work when my day job and life dont get in the way hahaha.
Oh an by the way your lights look good too!!!! Question? What shroud did you use in yours? Looks like the mini gatlin gun.
#135