New Mods to Install - With Pics
#91
https://g35driver.com/forums/tech-07...buying-14.html
#92
I would say that you would get the most "bang for your buck" with the lower outer tie braces for the front and probably the new lower M-brace for the rear. Those seem to strengthen the weakest points where the factory suspension mounts to. I know that the front outer tie braces combined with the front strut bar definitely made a noticeable difference on my car.
#93
OK... Travis, KulG35, and I installed the Hotchkis bars on my car this weekend and let me tell you, these things are freaking awesome. The car feels like a completely different car... no more lean in the corners, but when cruising the ride is virtually the same as stock. I think this is the single best mod I have done on the car so far. If you haven't bought a set of these bars yet, you better jump on the last few sets that are left! Pics to follow shortly.
Here are some post install pics of the Hotchkis sway bars without the lower from diffuser being re-installed.
Front:
Rear:
Some comparison pics of the stock front bar Vs. the Hotchkis front bar. FYI... Just for reference.... the stock front bar weighed in at 7.0 lbs and the new Hotchkis bar weighed a whopping 13.8 lbs.
And here are some comparison pics of the stock rear bar Vs. the Hotchkis rear bar. FYI... Just for reference.... the stock rear bar weighed in at 4.8 lbs and the new Hotchkis bar weighed in at 8.4 lbs.
Here are some post install pics of the Hotchkis sway bars without the lower from diffuser being re-installed.
Front:
Rear:
Some comparison pics of the stock front bar Vs. the Hotchkis front bar. FYI... Just for reference.... the stock front bar weighed in at 7.0 lbs and the new Hotchkis bar weighed a whopping 13.8 lbs.
And here are some comparison pics of the stock rear bar Vs. the Hotchkis rear bar. FYI... Just for reference.... the stock rear bar weighed in at 4.8 lbs and the new Hotchkis bar weighed in at 8.4 lbs.
#94
I would say that you would get the most "bang for your buck" with the lower outer tie braces for the front and probably the new lower M-brace for the rear. Those seem to strengthen the weakest points where the factory suspension mounts to. I know that the front outer tie braces combined with the front strut bar definitely made a noticeable difference on my car.
#95
#96
Well, since you basically already have the front outer tie braces, then I would go with the 4-Pt front brace next and maybe the front lower 2-Pt brace, as well, if it fits the X models.
#98
No problem... Good luck with the mods.
Also, if you end up buying the GT Spec braces, I suggest getting them from Rick at Riverside Infiniti. If you e-mail him directly at reudave@riversideinfiniti.com you will probably get a much faster response. Make sure to tell him that you are on G35Driver and that Adrian sent you and he will give you a pretty significant discount.
Also, if you end up buying the GT Spec braces, I suggest getting them from Rick at Riverside Infiniti. If you e-mail him directly at reudave@riversideinfiniti.com you will probably get a much faster response. Make sure to tell him that you are on G35Driver and that Adrian sent you and he will give you a pretty significant discount.
#99
The cover is designed for the HR motor, so it will work on either a 3.5L or 3.7L. This includes the 2007+ 350Z, 2007+ G35 Sedan, and the G37 Coupe & Sedan. The extra bolt holes in the front I believe are for when it is used on the 350Z fitment. I've plugged those 2 holes on mine, so you don't even know they are there anymore.
#100
No problem... Good luck with the mods.
Also, if you end up buying the GT Spec braces, I suggest getting them from Rick at Riverside Infiniti. If you e-mail him directly at reudave@riversideinfiniti.com you will probably get a much faster response. Make sure to tell him that you are on G35Driver and that Adrian sent you and he will give you a pretty significant discount.
Also, if you end up buying the GT Spec braces, I suggest getting them from Rick at Riverside Infiniti. If you e-mail him directly at reudave@riversideinfiniti.com you will probably get a much faster response. Make sure to tell him that you are on G35Driver and that Adrian sent you and he will give you a pretty significant discount.
#102
I would call him (even though it's still hard to get a hold of him that way). I called him to order the key cover delete, and although I had to leave my phone # with the guy that answered, Rick did call me back that day.
#103
Yeah, Rick is VERY busy, so he doesn't have time to check his PM's regularly. Your best bet is to call him. He is pretty responsive that way and he will also give you the best price over the phone.. just make sure to tell him that you are from the Driver forum... if you buy from their eBay store, you won't get the best price.
In talking to Rick he says that he typically takes care of customers in this order:
1. Walk In
2. Telephone
3. eBay
4. E-Mail.
5. Forums (PM's)
For this reason and since they are close, I just drive over there to order my parts.
San~man, they carry all of the GT-Spec parts at Riverside (I got my GT Spec Front Strut Bar there), but not all of them are listed on their Ebay page yet (unfortunately they haven't updated their Ebay page in a while). Your best off to call Rick and talk to him.
In talking to Rick he says that he typically takes care of customers in this order:
1. Walk In
2. Telephone
3. eBay
4. E-Mail.
5. Forums (PM's)
For this reason and since they are close, I just drive over there to order my parts.
San~man, they carry all of the GT-Spec parts at Riverside (I got my GT Spec Front Strut Bar there), but not all of them are listed on their Ebay page yet (unfortunately they haven't updated their Ebay page in a while). Your best off to call Rick and talk to him.
Thread
Thread Starter
Forum
Replies
Last Post