Vossen VVS-078s or Vossen VVS-084s?? which should i buy...i am ready to buy!
#32
#33
i dont have a choice since the tires are coming w/ the rims. but my next set i can always goto 35 instead of 30. sicne you said it will prob make my front .5-1" lower how do you think that will effect my camber? and eventually my tire wear? if i get the toe in spec you think i will be ok? or do you think i should get front camber arms?
The only thing you'll have to worry about is ground clearance up front. As long as you remember that your front bumper is closer to the ground and more prone to scraping, you'll be fine.
Regardless of tire size and ride height, make sure your toe is in spec and you won't have insane tire wear. You will have some camber wear but it isn't too bad. Your car has been lowered for a while so I'm guessing your toe is already in spec and your old tires will show how much camber wear you've had.
Also, what kind of tires are on the wheels? If they're directional tires you can flip them (take the tire off of the wheel one side and put on the other side) and prolong the life of your tires.
#34
^ they are directional so I can do that! which is good....yeah my current tires to be honest show little to no camber wear at all, yeah i have my toe's in spec. because I have the unlimited lifetime alignments from firestone which is AWESOME especially with lowered cars and well worth the extra 50 bucks. I got nitto ZR extreme tires. yeah I should be fine with my car being lower in the front I am used to a dropped car lower then what I currently drive.
Thread
Thread Starter
Forum
Replies
Last Post