Richmond/Henrico/Petersburg/Colonial Hgts G group
#5132
I appreciate all the help Tim. If I'm doing Tein H-techs on the sedan.. I know I'm gonna need camber and an alignment. I know a place that can do my alignment after we put the springs on... but would these camber bolts work?
http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:en
I just wanna be sure before I click BUY IT NOW
http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:en
I just wanna be sure before I click BUY IT NOW
All depends on what your trying to put on buddy. As for the turbo I'm not sure. Glad to hear your safe and can't wait till you get back.
Ben let me know when your trying to do your springs and I'll check my schedule to see if I have something going on. If not I'm more than happy to help.
Ben let me know when your trying to do your springs and I'll check my schedule to see if I have something going on. If not I'm more than happy to help.
#5133
yeah thats the part I was talking about..not sure what it was called, I have two of the three bolts on, just to replace it I would have to take off the strut so I figured I could just let it slide until I need new shocks and replace it then..you think it will be ok for a while?
#5135
Yeah I'm still kind of a noob on suspension. I'm not real clear on what exactly I'm gonna need for the camber? Because on my buddies STi we just did camber bolts in the rear.. but what do you do about the front?
#5139
You can usually get the rear alignment in with just larger eccentrics(camber and toe). Make sure you elongate the holes before putting it all together and make sure they can rotate all the way around. If not whoever aligns it will probably have to remove the arms again to elongate the chassis(which basicaly means removing the rear springs). If you use the SPC rear camber arms they come with rear toe eccentrics. READ THE INSTRUCTIONS!!! DON'T PUT THEM IN THE CAMBER ARMS!!! Tony used the SPC set up and the specs easily adjusted to nominal.
#5143
^dont think they have a name for the actual bumper Tim but here is the link to where have it advertised. They did a group buy in the vendor section as well.....looks like a very limited number made.
https://g35driver.com/forums/media-s...ront-here.html
https://g35driver.com/forums/media-s...ront-here.html