Richmond/Henrico/Petersburg/Colonial Hgts G group
#8537
#8540
#8541
im thinking of getting the xxr 521 matte black wheels either 18's or 20's i was wondering what is the max offset i can do without rolling the finders or stretching tires. you know jus bolt on and go. i want the rear to be atleast 10 inches wide and the front at most 9 so with that info what can i actually do?
#8543
im thinking of getting the xxr 521 matte black wheels either 18's or 20's i was wondering what is the max offset i can do without rolling the finders or stretching tires. you know jus bolt on and go. i want the rear to be atleast 10 inches wide and the front at most 9 so with that info what can i actually do?
offsets speak with Tony bc i dont know anything on how to figure that one... i think if you stay in the teens +12 to +17 is pretty moderate +0 i see sometimes too
#8544
Registered User
iTrader: (16)
im thinking of getting the xxr 521 matte black wheels either 18's or 20's i was wondering what is the max offset i can do without rolling the finders or stretching tires. you know jus bolt on and go. i want the rear to be atleast 10 inches wide and the front at most 9 so with that info what can i actually do?
9.5 & 10.5.
If you don't ever plan on lowering your car then an offset around +15 to +20. You can do a 255 up front and a 275 or 285 in the rear. I advise you to roll your rear quarters because you're gonna not want the 4x4 look. I ran a 275 lowered on S-Techs with the rears rolled and had no rubbing issues. Good luck with whatever you choose to go with!
#8545
9.5 & 10.5.
If you don't ever plan on lowering your car then an offset around +15 to +20. You can do a 255 up front and a 275 or 285 in the rear. I advise you to roll your rear quarters because you're gonna not want the 4x4 look. I ran a 275 lowered on S-Techs with the rears rolled and had no rubbing issues. Good luck with whatever you choose to go with!
If you don't ever plan on lowering your car then an offset around +15 to +20. You can do a 255 up front and a 275 or 285 in the rear. I advise you to roll your rear quarters because you're gonna not want the 4x4 look. I ran a 275 lowered on S-Techs with the rears rolled and had no rubbing issues. Good luck with whatever you choose to go with!
#8546
im thinking bout getting these.you think the off set and everything will work fine? i am planning to lower my car.
http://cgi.ebay.com/ebaymotors/20-20...ht_4873wt_1167
http://cgi.ebay.com/ebaymotors/20-20...ht_4873wt_1167
#8548
unfortunately those are the lowest offsets those come in on the 20" rims and you will find that you will need spacers to make them flush with your wheel well. Don't get me wrong, they are nice rims but too bad the offsets aren't a little lower to fit the coupe better, these are more suited for a sedan.
#8550
Registered User
iTrader: (16)
im thinking bout getting these.you think the off set and everything will work fine? i am planning to lower my car.
http://cgi.ebay.com/ebaymotors/20-20...ht_4873wt_1167
http://cgi.ebay.com/ebaymotors/20-20...ht_4873wt_1167
The following users liked this post:
rhampsterwha2 (09-20-2011)