Sorry about that. We will start working at 3:30. We will be removing tests pipes, y pipe, spacer, lowering springs and also switching the brembo's over to my car. PM me for my cell number and address if you would like to come over and help out. I just don't like putting my personal info on the internet for everyone to see

 

PM Brian_Brice. He's in Richmond and is the best detailer I've ever seen.

 

Any car meets or anything happening tonight? I'm in town visiting family and was wondering if anything is going on.

If I was in my work van I would help out with demodding I have plenty of tools.

Anyway LMK if anything is going on I'm in Newport news.

 

Doing some more de-modding today, if anybody wants to swing let me know.

 

Quick question. I got my new used brembos on my car and i'm in the process of bleeding the brakes. I'm having problems getting pedal pressure. I can get it if i pump the brakes. I'm a doing something wrong? I'm thinking i still have alot of air in my lines. but when i bleeding them i don't seem to be getting any more air out. I have bleed the brakes 5 times so far. Any advice would be great.

 

are you bleeding in this order:

Rear right, rear left, front right, front left?

Also are you bleeding the inboard plug than the outboard plug?

 

are you bleeding in this order:

Rear right, rear left, front right, front left?

Also are you bleeding the inboard plug than the outboard plug?

 

All parts have 5000 miles unless noted.
*** = I can installed the parts on your car.

Greddy TT (TH05-18G's turbos) with upgraded SS oil press and return line. ...............Return lines had AN fitting that screw into the oil pan.Need new gaskets for Turbos to manifold.
Greddy intercooler
Greddy Type RS
$4400
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

HKS FCon VPro with 350Z/G35 wire hardness and Denso MAP sensor and IAT sensor-$1300
[IMG][/IMG]

***HKS CAMP2 with OBDII connector--$400
[IMG][/IMG]

***HKS CAMP2 I/F Unit with Oil temp, oil pressure, and Boost sensors--$300
[IMG][/IMG]

***HKS EVC VI---$600
[IMG][/IMG]

***HKS AFK (Wideband and Knock-amp) Dual wideband setup---$750
[IMG][/IMG]

***Deatschwerks Injectors 600cc (Just clean by RC eng $156)---$400
[IMG][/IMG]
[IMG][/IMG]

****Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---SOLD
***GT SPEC Front Lower Tie Brace ---SOLD
***GT SPEC Rear Lower Tie Brace---SOLD
***New GT SPEC Rear Lateral Arm Brace---SOLD
***Stillen Front Strut Bar---SOLD
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

New Cosworth 96mm (0.020" over) Headgaskets
[IMG][/IMG]
[IMG][/IMG]

SAMCO Sport Red Silicone Coolant Hoses for the 350Z--$70
[IMG][/IMG]

OEM Nissan Pathfinder Rear Cooling Mod--$150[IMG][/IMG]

Glow-Shift 13-Row Oil Cooler Kit (with Hoses)---$200
[IMG][/IMG]

Mocal Oil Sandwich (With Thermostat)---$100
[IMG][/IMG]

Injected Performace Solid Motor Mounds---$100
[IMG][/IMG]

***GroundingGear 4-Wire Engine Grounding Kit---$20
[IMG][/IMG]

***AAM 3" True-Dual exhaust (for a 350Z, need to be extended a to fit a G35)---$700
[IMG][/IMG]

AAM 3" Downpipes with open wastegate dumps (One dump tube needs to be welder together)---$450
[IMG][/IMG]

AeroCatch Hood Lockable Latches---$80
[IMG][/IMG]

3" K&N filters---$20each
[IMG][/IMG]

Vibrant Vacuum block---$80
[IMG][/IMG]


ARP L19 Extreme Duty Head Studs---$200

***Walbro 255lph fuel pump--$80

 

Thanks for the info City. About 20 mins after posting i figured out what i was doing wrong. I forgot all about the inner bleeder. Yes i'm a dumbass. I'll be the first one to admit it when i screw up or do something wrong. But i tell you what the outer has had the **** bleed out of it. I'll finish it tonight after work and more then likely install my lower springs.

 

The Brembo install is complete and works well. Also got the lower springs installed last night and i can't wait for the springs to settle for i can exactly how much drop i'm going to get but i can already see the drop and it looks good. I took the car for a quick test drive last night and thinking about taking it for a nice drive tonight down to va beach

 

I have a few items for sale. If interested I will provide pics. Items were only installed for tops 5 weeks. Less than 1000 miles.

Megan racing test pipes
Stillen ypipe
R2c intake

Shoot me some offers

 

citymunky
I will have cash and car ready friday if you can install them this friday at my place. I am heading out of town this weekend and would like to take these things with me.

***Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---$250
***Stillen Front Strut Bar---$100

 

**Hotchkis Sway Bars (V2) (15K miles, not that it really matters)) ---SOLD
***GT SPEC Front Lower Tie Brace ---SOLD
***GT SPEC Rear Lower Tie Brace---SOLD
***New GT SPEC Rear Lateral Arm Brace---SOLD
***Stillen Front Strut Bar---SOLD

 

I need two stock 19inch rear tires for 05 coupe...anyone!?.. If anyone has all 4, id be interested in them also... THANKS!!

 

I just notice the Richmond thread has 8,200 post and was stated in 2008,
and this thread that was stated back in 2005 only has 6,868 posts. WTF?