Beshoff Project: Blown VQ35DE
Thread Starter
|
Former G35driver Vendor
Joined: Jan 2009
Posts: 230
Likes: 0
From: San Jose, CA
Beshoff Project: Blown VQ35DE
Just a teaser- today we start with this
and add a little pressure to spice things up
Story to follow
and add a little pressure to spice things up
Story to follow
Last edited by Brian@Beshoff; Nov 25, 2009 at 12:27 AM.
my guess cause its the easiest on the motor couple hour install time and they have an account with stillen.
Trending Topics
Thread Starter
|
Former G35driver Vendor
Joined: Jan 2009
Posts: 230
Likes: 0
From: San Jose, CA
Update
Off with the old belts and pulleys
Clean pallet to work with
New belts waiting to go to work...
4 new pretty billet and anodized aluminum pulleys. Very tasty
Clean pallet to work with
New belts waiting to go to work...
4 new pretty billet and anodized aluminum pulleys. Very tasty
Last edited by Brian@Beshoff; Nov 24, 2009 at 10:28 PM.
Thread Starter
|
Former G35driver Vendor
Joined: Jan 2009
Posts: 230
Likes: 0
From: San Jose, CA
The fuel pressure regulator gets a nice looking aluminum spacer that is tapped to feed the 7th injector
Valve cover breather equalization tubing is rerouted to clear the compressor belt
And the new snazzy intake plenum base is installed
The bad boy sits waiting, ready for work
Valve cover breather equalization tubing is rerouted to clear the compressor belt
And the new snazzy intake plenum base is installed
The bad boy sits waiting, ready for work
