^^coo! thanks man! ill do that soon hopefully

 

Hey Monard... Your welcome to come over sometime and I'll help you out with it. It should only take about an hour to get it fitted, but you will have to let it harden over night before you can install it.

 

thanks for the offer!
Ill take you up on that one of these days

 

If any of you come up on an extra set shoot me a pm.

 

haha same here

 

Damn JB weld lol!!! That ish is never coming off haha, i just used Epoxy...same thing
though ahha!!!

 

Anyone wanting the polished caps, you may want to PM CandleStickPark (Marcus) on here. He is still trying to get the rest of the caps out of Pi-Thon, along with some polished A/C caps, so he may be able to arrange for a few more sets of reservoir caps too. Try hitting him up.

 

LMAO!! Yeah, JB Weld is perminent! Any two part epoxy should work fine too.. I just don't ever wanting them to come apart, so that's why I used the JB Weld... plus, I use the stuff for just about everything. LOL

 

No problem, Monard. I should be free after the meet on the 21st.

 

the jb weld is un-necessary if you do it right. if you do it right you should be able to put in on and when you want it to come off you can spin it and it will catch the threads and come off

 

^ Yeah. I was able to thread mine on and off no problem before using the JB Weld... It just seemed a little too flimsy for me, and I wanted it to be more solid and perminent, so that's why I used the JB Weld.

 

haha nice, ya i just filed down the sides to the bare minimum and then pushed it down, and the threads locked it in place with no play then i spun it off and pushed it down again to make sure it was solid

 

Let me know, Shane and I are rolling up to Pi-Thon on the 21st.

 

hey marcus, are the ac line caps direct replacements or are they just caps like the ps one?

 

Mike they are caps like the PS. One of them will need to be affixed to the cap in order to stay on, its barely too big.