are you rubbing ????

 

Is this the Z or the G springs (S.Tech F: -1.2" / R: -.9")

 

why did u do the spring mod for i didnt

 

350z H-Tech, no other suspension mods... might be for sale soon!

 

^ are those 19's or 20's?

 

so I have an 04 coupe with stock 18s, If I get g35 s-techs will I need to roll my fenders? If I get 350z h-techs or 350z s-techs will I need to roll my fenders?

 

You dont have to roll your fenders with any of those set ups.

 

^ oh great thanks!

I wanna be pretty low, I'm thinking 350z s-techs.

 

did u roll your fenders? is it rubbing? also any camber kit?

 

350Z springs

 

I have decided to go for the 350z S-Techs but are affraid they can be to low, any of you guys with 350z S-Techs and 20" wheels that think they are to low?

 

^^^I have 20" rims and Z S-techs + a spring mount mod. My G is a daily driver and I feel like the drop is just fine, however I tend to scrape sometimes on large speed bumps and some driveways, and if I have 4 people total in the car. Some places have become off limits for me now, like downtown parking garages (because of the steep driveways coming back from the underground parking garage).

Despite the slight scrape every now and then, you should be fine just be a little more cautious and take it slow over larger speed bumps and steep driveways.

 

Looking at the pics of your car, i have finally decided to go for them, but i dont think i will do the springmount, cause my rear 20x10 ET20 285/30-20 rub on original springs.

 

most people don't like having the Z S-techs without the Spring mount mod since it leaves the car at a slight slant. It gives it the nose dive effect. You might want to consider going with 275/30/20 tires to eliminate the rubbing issue.

Here is a pic of what my G looked like before the Spring mount mod and with my old rims.


You might also find this link helpful. Good luck

https://g35driver.com/forums/brakes-...fter-pics.html

.