^ If I get Z stechs with no spring mount mod, and stock coupe 18s, will it be okay with no camber kit, no spacers, and no rolled fenders?

 

Camber kit is a must. Trust me!!!!!!


Wheel spacers and rolled fenders...............it is up to you(not that necessary). There are tons of pics here in the forum with/without spacers and rolled/not rolled fenders.


This is with 18's(oem).

 

Oh, ok, thanks for the help.

 

can someone tell me how much would be a decent cut on a spring mount when dropped on z s-tech? Thanks

 

For those of you with S-tech's for G35 coupe? Are they known for uneven drop like 350Z H-tech's do?

 

nope, they look fine. But imho, the s-tech rear spring rate is a bit too soft. It rubs a lot in my case.

 

It's the front or rear that is rubbing? I have 9.5in/+15 offset with 245/35/20 tires in the front, I remember you have the same too. I switching to 240/30/20 tires to reduce rubbing, that is why I'm changing to G35 S-tech to get more drop.

 

noone with 285/30/20s?

 

want to know the samething but for Z htechs instead



also, is it true Z Htechs are know for being uneven, cause it seems one side is higher than the other on the rear

 

The fronts are fine with 245/35/20. I never had any rubbing on the front.
On the rear, I had 285/30/20 with -2.5 camber and semi-rolled fender, rubs goes away but not until i fit 4 people in the car.

 

does anyone have a pic of G or Z S-tech's with nismo front?

 

my buddy's G the one on the right. G35 s-tech, nismo front + 19" wheels. Sorry for crappy pics, but u get the idea.

 

^^ thanks

 

G35 S-Tech's Before and After

Stock 18's 245 rear/225 front

Looking for M45 wheels, planning on getting them soon (that is when I am going to do the camber kit and spacers)

Sorry for the Blackberry pics, figured I would throw up a before and after for the people who wanted to see the comparison...

Before:


After:

 

i just dropped my car on 350z s-tech, and Its not much of a difference from my old h-tech. The rear looks high still for some reason. Maybe with springmount cut would help, but it just seems like the springs didnt even make a difference. Am I doing something wrong?