Anyone here lowered on S-tech 350z?? Hows the ride?? I have H-tech 350z and i wanna go lower.. But i cant decide with G35 or 350z S-tech. What do you guys think???

 

^Z S-Techs for sure

 

Bump!

 

More shots of my 350Z H-Tech drop...

Front Wheel Gap





Rear Wheel Gap

 

^Nice looking wheels

 

How's the ride on these? I like these because its more of a drop than g35 htechs but less than s-techs. I really like the look of s-techs but I'm concerned I'm going to be scraping everywhere.

 

i looked at all 18 pages but i don't see anyone with 350z htech that have 295 in the rear...

i have 19x10.5 22offset with 295-30-19, i'm planning to lower it with 350z htech. I was wondering if i will have any problem? oh yeah, i wont be doing the spring mount mod. any help would be great. thanks

 

The ride is nice but the only thing that bothers me a bit is the lower spring rate in the rear. Compared with stock, it feels just a little "bouncy" in the rear but it really isn't all that noticeable. and yeah that's why i went with the H-techs, but I still have to be careful on some speed bumps.

 

dont have pic. But i can tell you this you are going to have roll ur fenders. I Had 19x10.5 +22 running 275-35-19 And it was perfect no rub or anything. But with anything higher then 275 you would rub. Hope that kinda helps

 

thanks.. But i think im gonna go with H&R sports. I saw a few pics of cars with H&H sport spring and they are the perfect drop.

https://g35driver.com/forums/suspens...ngs-socal.html

 

Might be a noob question and sorry if so, but do you need a camber kit with the G35 s-techs?

 

It is not required but it can not hurt.

 

Good to know, thanks

 

anyone have problems with the back sitting lower?

i just installed 350z H-techs on my 03 g35 and the rear gap seems to be smaller than the front. no spring mod!!! i am running 285's out back on a 10 inch wide wheel so its not stretched at all, where as before with 275's they were slightly stretched.

edit: im wondering if they need time to settle

 

^ Did you install the springs backwards?