why dont you just get an alignment and see where you are? this is the only way to be certain.... if you are within spec, youre good. if not, buy a camber kit. (this is when lifetime alignments come in handy.)
rule of thumb, those who are lower than 1" drop = def rear camber kit/might need front camber kit.

 

^ ok well that is the plan after any suspension works. and didnt know infiniti did lifetime alignments. but still intertrested in knowing if spacers affect the way tire sits at all

 

Spacers do not affect the alignment settings. They just push out the wheels farther out towards [in some cases, past] the fenders.

 

^ awesome and thanks for the answer. i wasnt sure if it changed the way the tire sits on the ground since its changing where the rim is

 

Z or G s-techs?

 

Good question.... I'd like to know as well. That silver G looks great BTW

 

Not going coils yet, but would like to go a .5-.75" lower up front. Which would do the job the best: coupe or Z s-techs. Running sedan s-techs now.

 

Surprisingly they are G35 S-Techs with Spring Mount Mod.
If i didnt get an Amazing deal on these i def would have gotten the Z version for the higher spring rate.

 

im on stechs and my **** is cambered the **** out in tye front..-2.5 is that normal? -3 in the rear. stechs def need arms all around...

 

don't like the rear, ruins the nice lines of the g

 

do you have any pictures of the car. im also assuming you are on the oem wheels with the rays in your sig. but im running on the oem 18's and only have a camber kit in the rear. the front is actually doing better then i thought but with me being on the 18's thatll probably change things a little. i mean the front is a little cambered but i took it up to nissan and they adjusted on some things as much they could and they don't wear on the inside. but ya every g is different and ive seen some people down here with hella bad camber. whatever you do don't go ichiba in the front. it will be almost no help to you

 

Buehler? Anyone?

 

Any pics with 350z h-techs, no spring mod and oem 18s with spacers? i realize thats really specific but worth a shot

 

Its ridiculously hard to find a picture of stock coupe 18s with spacers, so, even though I have the rear spring mount mod, and I have 350z H&R springs I'll post a picture.

 

Thanks a ton thats perfect since i have a tb too