A couple new parts just arrived :)
#123
Started a new project, working on a differential cooler. I have the pump and cooler mounted, but unfortunately the fittings needed for the differential housing are back ordered... so I have to wait to finish install. All hoses will be Earl's braided, Earl's fittings, and the pump will have an on/off switch along with a temp switch, so it will only work when the diff fluid is hot enough - and I'll have the option of only running it on the track.
The cooler is enclosed in an aluminum case to protect it from rocks and road debris, and the front of the cooler is covered with a metal mesh.
I'll post up more pics and video once it's finished
Cooler and pump mounted.
Side view - the cooler sits higher than the exhaust, so scraping it shouldn't be an issue.
This is before I put the brackets or mesh on the cooler.
The cooler is enclosed in an aluminum case to protect it from rocks and road debris, and the front of the cooler is covered with a metal mesh.
I'll post up more pics and video once it's finished
Cooler and pump mounted.
Side view - the cooler sits higher than the exhaust, so scraping it shouldn't be an issue.
This is before I put the brackets or mesh on the cooler.
Last edited by zackt69; 07-31-2008 at 01:01 AM.
#125
#129
#131
#135