Seibon Carbon hood
#1
Join Date: May 2004
Location: Sac town
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
Seibon Carbon hood
Im going to give a report on the Seibon CF hood. After seeing and hearing about the TS one I said screw it and bought the Seibon. The box came in and the packing was TOP NOTCH!! Great packing I was VERY impressed! Pulled it out of the box and was REALLY impressed! The edges were rolled and the weave was very good! Took my OEM hood off so I could throw the Seibon on. Bolted right up! Or so I thought! I closed the hood to find, 1. the hood wouldnt latch. 2. The hood was WAYYY off! There was a FAT gap on the sides and it look as though it was cut to short. I started my tweaking, I drilled the hood latch on the car out so I could raise it up to meet the hood latch on the hood. After adjusting it ALL the way it still wouldnt reach! I then said screw it and cut off a hook that was on a old hood. I then cut the hook off of the carbon hood and welded on the new hook. This worked perfect! BUT not many people would be able to do this. I then had to notch out the back hinges so I could move the hood forward and adjust it side to side. If I had it to do all over again I wouldnt. I REALLY like the look of the hood but fitment sux and most couldnt do what I had to do to make it work. The TS hood I saw had weave problems BUT it fit great. I hope this helps members out before they buy a aftermarket hood. Just my .02
#6
#7
Join Date: May 2004
Location: Sac town
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
OK this was not a matter of just adjusting the hood latch. Cmon guys I build cars! I drilled the holes out and it still didnt fit! The underside is resin not plastic. I also forgot on thing. In the middle of the hood above the cutouts the hood sags. There in no support on each side of the vents. Anyway these are only my $.02 Do what you will with it!
Trending Topics
#8
Steve,
I noticed you have a different model/style Seibon. There was no drilling with my Seibon TS hood, I was there when the bodyshop installed the hood, all they did was loosened the hood latch, re-tightened it, and it closes, but does require a little bit of force for latch to catch. " DoingOK " also has the Seibon TS, and did same thing with his hood.
I noticed you have a different model/style Seibon. There was no drilling with my Seibon TS hood, I was there when the bodyshop installed the hood, all they did was loosened the hood latch, re-tightened it, and it closes, but does require a little bit of force for latch to catch. " DoingOK " also has the Seibon TS, and did same thing with his hood.
#9
Join Date: May 2004
Location: Sac town
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
#10
#11
Join Date: May 2004
Location: Sac town
Posts: 4,339
Likes: 0
Received 0 Likes
on
0 Posts
I did check it BUT didnt latch it!lol. I saw the problem with fitment on the sides and thought no biggie it can be adjusted so I pulled it off and painted it. Yes I was like a kid at Christmas! Ive just been rushing everything so much cause my time is short right now! Oh well its all good now. It was just a pain to get right and I know a lot of guys wouldnt want to deal with it!
#13
Thread
Thread Starter
Forum
Replies
Last Post
Extreme Dimensions
Southern California
3
10-19-2015 06:28 PM