Borla Exhaust System Fits 2008-up Infiniti G35 Sedan (with 3.5-liter engine)
Joined: Mar 2008
Posts: 486
Likes: 0
From: Glendale,CA
Borla Exhaust System Fits 2008-up Infiniti G35 Sedan (with 3.5-liter engine)
Check it out guys.
http://www.crutchfield.com/p_6261402...0.html?tp=1225
http://www.crutchfield.com/p_6261402...0.html?tp=1225
Joined: Jan 2004
Posts: 21,095
Likes: 47
From: Toronto, GTA north
Way too much $$$
I had Borla on my 04 & wasn't impressed with the way it went together.
Everything was slip fit & clamps.
I ended up taking it off because of drone.
I had Borla on my 04 & wasn't impressed with the way it went together.
Everything was slip fit & clamps.
I ended up taking it off because of drone.
I got mine for $1200 shipped in the fall! That price is way too much. Fitment was not great at all but I have an '07? There is drone, but not too bad. Pleased with the sound. My butt dyno is broken. Still scratching my head about fitment--is it just me? ...have gone under the car to tweek positioning several times to get it right now(I hope). I bought it because it was T304SS...in the end, I wish I got FI.
I had it. Too much drone. Very nice tone though. Easy assembly. Tips stick out about 1/2". The right side was a little further out so the only way to even out was too bring out the left side. The flange holes were spaced too close for stock bolts so I needed to slot one hole on each side little to fit. Ended up returning to Crutchfield because of the drone. So sad after that.
Thanks for the feedback... I encountered the same issues and was wondering if I got some early production unit or something. In addition to the front holes needing bored out and the right tip sticking out (along with the exhaust hangers), the exhaust is also tilted somewhat starting from the front H pipe. In any case, it definitely has some small fitment issues--surprising because the borla headers for my WRX fit so damn well.
Trending Topics
Thanks for the feedback... I encountered the same issues and was wondering if I got some early production unit or something. In addition to the front holes needing bored out and the right tip sticking out (along with the exhaust hangers), the exhaust is also tilted somewhat starting from the front H pipe. In any case, it definitely has some small fitment issues--surprising because the borla headers for my WRX fit so damn well.
). Don't even think about a dremel unless you have all day and a lots of extra tips. The tone was friggin' awsome but my old ears just couldn't take the drone at freeway speeds. It actually felt quieter when I floored it then crusing at 60. I guess it just depends how sensitive you are to exaust sounds. The fit was not perfect but nothing unforgivable.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM





