That's neat ^ and yes I meant you will lose some color effect at the cutoff. I meant nice painting of the fog lens, i see you used spray tint. I consider amber to be orange... get those eyes checked ;D!

 

I finally got around too installing my front camber kit. But I only had time to do one side
Took me way too long but hopefully this weekend I can knock out my other side with no problems.
On my way too being one of the cool stancy guys.. Ha ha

 

i chose amber bec i felt like with a yellow tint it would still be too green with the bulbs. i really wanted that deep golden color

 

The contrast is great cruising in bad weather, I use them all the time in fog and rain. I love the look too .

 

New hood and emblemless grill installed.

 

Loving that suede dash

 

Definitely not a fan at all of those headlights.



BUT I really love your car overall. Simple, clean and tasteful mods that work great together, especially now with the new grill. It really syncs well with the painted vents in the Inven. Looking good SBD!!

 

Hey how can I confirm which intake spacer I have? Need to buy the hardware and I measured it and the numbers seem off.

 

Lol thanks bro. Im gonna do a color change soon if I can decide on a color and some new wheels

 

measure.

 

Emotions don't come in many sizes. 19x10.5 +20 probably .Pretty sure that's the only 10.5 sizing

 

FINALLY got rid of those garbage embarrassing eBay pedals previous owner put on. If the cheap parts you buy are worse than oem, your license should be revoked for life.

 

Wash, dressed the tires, vacuum, interior protectant, cleaned my interior windows, treated the seats with Wolfgang for the 2nd time (love this stuff) clay bar and waxed her.

 

Track car... I had removed the ac, radio, clock... pretty much everything not needed. Lots of extra wires and harnesses left over, so I started taking out all the unnecessary wiring. Once things got slimmed down a little, I decided to move the interior fuse panel to the center since the cage is kind of in the way.

Old fuse panel location-


Need to depin and untangle this mess.


What I've pulled out so far...